POEモデルのD-Hパラメータ化による幾何学的解釈
Geometric interpretation of the general POE model for a serial-link robot via conversion into D-H parameterization
直列リンクロボットのPOEモデルをD-Hモデルへ自動変換する解析手法を開発し、両モデルの等価性と可同定性パラメータ数の上限を示した。
著者: Liao Wu, Ross Crawford, Jonathan Roberts
分類: cs.RO
原文アブストラクト
While Product of Exponentials (POE) formula has been gaining increasing popularity in modeling the kinematics of a serial-link robot, the Denavit-Hartenberg (D-H) notation is still the most widely used due to its intuitive and concise geometric interpretation of the robot. This paper has developed an analytical solution to automatically convert a POE model into a D-H model for a robot with revolute, prismatic, and helical joints, which are the complete set of three basic one degree of freedom lower pair joints for constructing a serial-link robot. The conversion algorithm developed can be used in applications such as calibration where it is necessary to convert the D-H model to the POE model for identification and then back to the D-H model for compensation. The equivalence of the two models proved in this paper also benefits the analysis of the identifiability of the kinematic parameters. It is found that the maximum number of identifiable parameters in a general POE model is 5h+4r +2t +n+6 where h, r, t, and n stand for the number of helical, revolute, prismatic, and general joints, respectively. It is also suggested that the identifiability of the base frame and the tool frame in the D-H model is restricted rather than the arbitrary six parameters as assumed previously.
関連論文
- URDFを超えて:共有・拡張・標準化されたロボットモデルのための汎用ロボット記述ディレクトリロボットモデリング
- 記号回帰による解釈可能なロボット摩擦学習ロボットモデリング
- 拡張URDF:ロボット記述における並列機構の考慮ロボットモデリング
- 2D・3Dロボットモデルのラグランジュ定式化に基づくオンライン署名照合ロボットモデリング
- AutoURDF: 点群フレームからのクラスタ登録による教師なしロボットモデリングロボットモデリング
- Exp[licit]: 指数写像に基づくロボットモデリングソフトウェアロボットモデリング
