平面と距離の制約を用いた2Dレーザーとロボット運動学パラメータの同時キャリブレーション
SCALAR: Simultaneous Calibration of 2D Laser and Robot Kinematic Parameters Using Planarity and Distance Constraints
平板と穴あき板を使い、2Dレーザー距離計と6自由度ロボットの運動学パラメータを同時にキャリブレーションする手法を提案し、ツール位置誤差を低減した。
著者: Teguh Santoso Lembono, Francisco Suárez-Ruiz, Quang-Cuong Pham
分類: cs.RO
原文アブストラクト
In this paper, we propose SCALAR, a calibration method to simultaneously calibrate the kinematic parameters of a 6-DoF robot and the extrinsic parameters of a 2D Laser Range Finder (LRF) attached to the robot's flange. The calibration setup requires only a flat plate with two small holes carved on it at a known distance from each other, and a sharp tool-tip attached to the robot's flange. The calibration is formulated as a nonlinear optimization problem where the laser and the tool-tip are used to provide planar and distance constraints, and the optimization problem is solved using Levenberg-Marquardt algorithm. We demonstrate through experiments that SCALAR can reduce the mean and the maximum tool position error from 0.44 mm to 0.19 mm and from 1.41 mm to 0.50 mm, respectively.
