剛性と減衰を可変できる動的ロボットアクチュエータ
A Dynamic Robotic Actuator with Variable Physical Stiffness and Damping
遠隔操作で精密作業から動的作業まで対応できるよう、剛性切替時間50ms・出力速度20rad/s・可変減衰を備えた3モータ構成の可変インピーダンスアクチュエータを設計・試作し性能を測定した論文。
著者: Manuel Aiple, Wouter Gregoor, Andre Schiele
分類: cs.RO, cs.HC
原文アブストラクト
This study is part of research aiming at increasing the range of dynamic tasks for teleoperated field robotics in order to allow operators to use the full range of human motions without being limited by the dynamics of the robotic manipulator. A new variable impedance actuator (VIA) was designed, capable of reproducing motions through teleoperation from precise positioning tasks to highly dynamic tasks. The design requirements based on previous human user studies were a stiffness changing time of 50 ms, a peak output velocity of 20 rad/s and variable damping allowing to suppress undesired oscillations. This is a unique combination of features that was not met by other VIAs. The new design has three motors in parallel configuration: two responsible for changing the VIA's neutral position and effective stiffness through a sliding pivot point lever mechanism, and the third acting as variable damper. A prototype was built and its performance measured with an effective stiffness changing time of 50 to 120 ms for small to large stiffness steps, nominal output velocity of 16 rad/s and a variable damper with a damping torque from 0 to 3 Nm. Its effective stiffness range is 0.2 to 313 Nm/rad. This concludes that the new actuator is particularly suitable for highly dynamic tasks. At the same time, the new actuator is also very versatile, making it especially interesting for teleoperation and human-robot collaboration.
