レーザー微細加工による電界流体力学スラスタを用いたセンチメートル級飛行ロボット
A laser-microfabricated electrohydrodynamic thruster for centimeter-scale aerial robots
355nmレーザー微細加工で作製した電界流体力学(EHD)スラスタを4基搭載し、37mgの機体が4.6kVで離陸できることを示した論文。
著者: Hari Krishna Hari Prasad, Ravi Sankar Vaddi, Yogesh M Chukewad, Elma Dedic, Igor Novosselov, Sawyer B Fuller
分類: cs.RO
原文アブストラクト
To date, insect scale robots capable of controlled flight have used flapping wings for generating lift, but this requires a complex and failure-prone mechanism. A simpler alternative is electrohydrodynamic (EHD) thrust, which requires no moving mechanical parts. In EHD, corona discharge generates a flow of ions in an electric field between two electrodes; the high-velocity ions transfer their kinetic energy to neutral air molecules through collisions, accelerating the gas and creating thrust. We introduce a fabrication process for EHD thruster based on 355 nm laser micromachining and our approach allows for greater flexibility in materials selection. Our four-thruster device measures 1.8 x 2.5 cm and is composed of steel emitters and a lightweight carbon fiber mesh. The current and thrust characteristics of each individual thruster of the quad thruster is determined and agrees with Townsend relation. The mass of the quad thruster is 37 mg and the measured thrust is greater than its weight (362.6 uN). The robot is able to lift off at a voltage of 4.6 kV with a thrust to weight ratio of 1.38.
関連論文
- ミリグラム級飛行デバイス向けの新しい翼ストローク・翼ピッチ機構マイクロ飛行ロボット
