日本フィジカルAI新聞

世界のフィジカルAIを、日本語で。

デッドレコニングarXiv:1912.07805

車輪搭載MEMS IMUによるデッドレコニングシステム

Wheel-INS: A Wheel-mounted MEMS IMU-based Dead Reckoning System

シェア:XThreadsFacebookLINEはてブBluesky

車輪中心にMEMS IMUを取り付け、ジャイロ出力から車輪速度を推定してオドメトリの代わりに使い、さらに車輪回転でバイアス誤差を相殺することで、従来のオドメトリ支援INSより高精度なデッドレコニングを実現した。

著者: Xiaoji Niu, Yibin Wu, Jian Kuang

分類: cs.RO

原文アブストラクト

To improve the accuracy and robustness of the inertial navigation systems (INS) for wheeled robots without adding additional component cost, we propose Wheel-INS, a complete dead reckoning solution based on a wheel-mounted microelectromechanical system (MEMS) inertial measurement unit (IMU). There are two major advantages by mounting an IMU to the center of a non-steering wheel of the ground vehicle. Firstly, the gyroscope outputs can be used to calculate the wheel speed, so as to replace the traditional odometer to mitigate the error drift of INS. Secondly, with the rotation of the wheel, the constant bias error of the inertial sensor can be canceled to some extent. The installation scheme of the wheel-mounted IMU (Wheel-IMU), the system characteristics, and the dead reckoning error analysis are described. Experimental results show that the maximum position drift of Wheel-INS in the horizontal plane is less than 1.8% of the total traveled distance, reduced by 23% compared to the conventional odometer-aided INS (ODO/INS). In addition, Wheel-INS outperforms ODO/INS because of its inherent immunity to constant bias error of gyroscopes. The source code and experimental datasets used in this paper is made available to the community (https://github.com/i2Nav-WHU/Wheel-INS).

関連論文

  1. 1Boston Dynamics、車輪付きAtlasの研究試作機を紹介研究・技術
  2. 2GXOとApptronik、Apolloの物流現場試験を拡大 最大1,000台の展開を構想量産・展開
  3. 3newmoとKDDIが資本業務提携 2028年に堺市で自動運転タクシー商用化目指す提携・買収
  4. 4NVIDIA、CoRLでGR00T 2とIsaac Lab 3.0を発表新製品・発表
  5. 5UC BerkeleyとNVIDIAの研究者、AIエージェントでロボット制御コードを仮想環境で改善研究・技術

PR・アフィリエイト広告

FRONTIER(GPU搭載BTOパソコン)

FRONTIER(GPU搭載BTOパソコン)の公式広告バナーFRONTIERでGPU搭載PCを見る ↗
PR本紙発行元 EmplifAI