触覚刺激機構を組み込んだグリッパのための新規把持力計測コンセプト:設計・検証・ユーザスタディ
A Novel Grip Force Measurement Concept for Tactile Stimulation Mechanisms -- Design, Validation, and User Study
触覚刺激機構を内蔵したグリッパで、単一の力センサにより左右の把持力を計測する新手法を開発し、精度検証とユーザ実験で有効性を示した論文。
著者: Guy Bitton, Ilana Nisky, David Zarrouk
分類: cs.RO
原文アブストラクト
We developed a new grip force measurement concept that allows for embedding tactile stimulation mechanisms in a gripper. This concept is based on a single force sensor to measure the force applied on each side of the gripper, and it substantially reduces artifacts of force measurement caused by tactor motion. To test the feasibility of this new concept, we built a device that measures control of grip force in response to a tactile stimulation from a moving tactor. First, we used a custom designed testing setup with a second force sensor to calibrate our device over a range of 0 to 20 N without movement of the tactors. Second, we tested the effect of tactor movement on the measured grip force and measured artifacts of 1% of the measured force. Third, we demonstrated that during the application of dynamically changing grip forces, the average errors were 2.9% and 3.7% for the left and right sides of the gripper, respectively. Finally, we conducted a user study and found that in response to tactor movement, participants increased their grip force, and that the increase was larger for a smaller target force and depended on the amount of tactile stimulation.
