精密・動的タスクに対応する自己適応型可変インピーダンスアクチュエータ制御
Self-Adapting Variable Impedance Actuator Control for Precision and Dynamic Tasks
追加センサなしで「遅ければ硬く、速ければ柔らかく」という制御則により可変インピーダンスアクチュエータのインピーダンスを自動調整し、遠隔操作で精密作業と動的作業の両方をこなせることを24名の被験者実験で示した研究。
著者: Manuel Aiple, Andre Schiele, Frans C. T. van der Helm
分類: cs.RO, cs.HC
原文アブストラクト
Variable impedance actuators (VIAs) as tool devices for teleoperation could extend the range of tasks that humans can perform through a teleoperated robot by mimicking the change of upper limb stiffness that humans perform for different tasks, increasing the dynamic range of the robot. This requires appropriate impedance control. Goal of this study is to show the effectiveness of a controller that does not require additional sensors, reducing system complexity and increasing ease of use. The controller should allow to perform precise positioning tasks and dynamic tasks like hammering through teleoperation with a VIA tool device automatically adapting the impedance setting of the VIA. This is achieved by a control law according to the principle "slow-stiff/fast-soft". The controller was tested in a human user study with 24 participants comparing the human-machine performance with the self-adapting controller in a bilateral telemanipulation experiment with two tasks (precision/dynamic) using three impedance settings (high/low/adaptive impedance). The results indicate that the proposed system performs equally well as state of the art stiff teleoperation devices for precision tasks, while having benefits in terms of increased safety and reduced wear for dynamic tasks. This is a step towards teleoperation with a wide dynamic range.
