ケーブル駆動パラレルロボットのフィードフォワード制御に対する入力整形
Input-Shaping for Feed-Forward Control of Cable-Driven Parallel Robots
ケーブル張力を考慮したフィードフォワード制御に輸入整形フィルタを組み合わせ、移動プラットフォームの残留振動を低減する手法を提案し、実機実験で速度誤差のピークツーピーク振幅を72%改善した。
著者: Sana Baklouti, Eric Courteille, Philippe Lemoine, Centrale Nantes, Stéphane Caro
分類: cs.RO, cs.SY, eess.SY, physics.class-ph
原文アブストラクト
This paper deals with the use of input-shaping filters in conjunction with a feed-forward control of Cable-Driven Parallel Robots (CDPRs), while integrating cable tension calculation to satisfy positive cable tensions along the prescribed trajectory of the moving-platform. This method aims to attenuate the oscillatory motions of the moving-platform. Thus, the input signal is modified to make it self-cancel residual vibrations. 5 The effectiveness, in terms of moving-platform oscillation attenuation, of the proposed closed-loop control method combined with shaping inputs is experimentally studied on a suspended and non-redundant CDPR prototype. This confirms residual vibration reduction improvement with respect to the unshaped control in terms of Peak-to-Peak amplitude of velocity error, which can achieve 72 % while using input-shaping filters.
