全周回転が可能なエンドエフェクタを備えたケーブル駆動パラレルロボット
A Cable-Driven Parallel Robot with Full-Circle End-Effector Rotations
ケーブル駆動パラレルロボットに球面パラレルリストを直列接続し、8つの固定アクチュエータで駆動することで、広い並進作業空間と無制限の姿勢作業空間を両立させたハイブリッドロボットの設計・モデリング・試作を行った。
著者: Marceau Métillon, Philippe Cardou, Kévin Subrin, Camilo Charron, Stéphane Caro
分類: cs.RO
原文アブストラクト
Cable-Driven Parallel Robots (CDPRs) offer high payload capacities, large translational workspace and high dynamic performances. The rigid base frame of the CDPR is connected in parallel to the moving platform using cables. However, their orientation workspace is usually limited due to cable/cable and cable/moving platform collisions. This paper deals with the design, modelling and prototyping of a hybrid robot. This robot, which is composed of a CDPR mounted in series with a Parallel Spherical Wrist (PSW), has both a large translational workspace and an unlimited orientation workspace. It should be noted that the six degrees of freedom (DOF) motions of the moving platform of the CDPR, namely, the base of the PSW, and the three-DOF motion of the PSW are actuated by means of eight actuators fixed to the base. As a consequence, the overall system is underactuated and its total mass and inertia in motion is reduced.
関連論文
- ケーブル駆動パラレルロボットのための剛性に基づく解析的中心法ケーブル駆動パラレルロボット
- 運動学的拘束を有する平面ハイブリッドケーブル駆動パラレルロボットのモデリング・振動制御・軌道追従ケーブル駆動パラレルロボット
