カメラ内部パラメータとLiDAR-カメラ外部パラメータの同時キャリブレーション
Joint Camera Intrinsic and LiDAR-Camera Extrinsic Calibration
チェッカーボード周囲に円形穴を追加した新パターンのキャリブレーションボードを設計し、再投影制約に基づくコスト関数でカメラ内部・歪み・LiDAR-カメラ外部パラメータを同時に推定する手法を提案した。
著者: Guohang Yan, Feiyu He, Chunlei Shi, Xinyu Cai, Yikang Li
分類: cs.RO
原文アブストラクト
Sensor-based environmental perception is a crucial step for autonomous driving systems, for which an accurate calibration between multiple sensors plays a critical role. For the calibration of LiDAR and camera, the existing method is generally to calibrate the intrinsic of the camera first and then calibrate the extrinsic of the LiDAR and camera. If the camera's intrinsic is not calibrated correctly in the first stage, it isn't easy to calibrate the LiDAR-camera extrinsic accurately. Due to the complex internal structure of the camera and the lack of an effective quantitative evaluation method for the camera's intrinsic calibration, in the actual calibration, the accuracy of extrinsic parameter calibration is often reduced due to the tiny error of the camera's intrinsic parameters. To this end, we propose a novel target-based joint calibration method of the camera intrinsic and LiDAR-camera extrinsic parameters. Firstly, we design a novel calibration board pattern, adding four circular holes around the checkerboard for locating the LiDAR pose. Subsequently, a cost function defined under the reprojection constraints of the checkerboard and circular holes features is designed to solve the camera's intrinsic parameters, distortion factor, and LiDAR-camera extrinsic parameter. In the end, quantitative and qualitative experiments are conducted in actual and simulated environments, and the result shows the proposed method can achieve accuracy and robustness performance. The open-source code is available at https://github.com/OpenCalib/JointCalib.
