テンセグリティロボットの6自由度姿勢トラッキング
6N-DoF Pose Tracking for Tensegrity Robots
RGB-D動画とケーブル長センサを用いて、テンセグリティロボットの各剛体要素の6自由度姿勢を物理制約付き最適化で追跡する手法を提案し、実機実験で高精度を達成した。
著者: Shiyang Lu, William R. Johnson, Kun Wang, Xiaonan Huang, Joran Booth, Rebecca Kramer-Bottiglio, Kostas Bekris
分類: cs.RO, cs.CV
原文アブストラクト
Tensegrity robots, which are composed of compressive elements (rods) and flexible tensile elements (e.g., cables), have a variety of advantages, including flexibility, low weight, and resistance to mechanical impact. Nevertheless, the hybrid soft-rigid nature of these robots also complicates the ability to localize and track their state. This work aims to address what has been recognized as a grand challenge in this domain, i.e., the state estimation of tensegrity robots through a markerless, vision-based method, as well as novel, onboard sensors that can measure the length of the robot's cables. In particular, an iterative optimization process is proposed to track the 6-DoF pose of each rigid element of a tensegrity robot from an RGB-D video as well as endcap distance measurements from the cable sensors. To ensure that the pose estimates of rigid elements are physically feasible, i.e., they are not resulting in collisions between rods or with the environment, physical constraints are introduced during the optimization. Real-world experiments are performed with a 3-bar tensegrity robot, which performs locomotion gaits. Given ground truth data from a motion capture system, the proposed method achieves less than 1~cm translation error and 3 degrees rotation error, which significantly outperforms alternatives. At the same time, the approach can provide accurate pose estimation throughout the robot's motion, while motion capture often fails due to occlusions.
