準静油圧アクチュエータによるロボット脚の柔軟な高速動作と高い持ち上げ力の両立
A Bimodal Hydrostatic Actuator for Robotic Legs with Compliant Fast Motion and High Lifting Force
油圧トランスミッションをバルブで動的に再構成し、脚のスイング相とスタンス相の二モード動作に適応するアクチュエータを開発。実験で高速切替と衝撃時のシームレスな移行、力・速度・コンプライアンスの要求を満たすことを示した。
著者: Alex Lecavalier, Jeff Denis, Jean-Sébastien Plante, Alexandre Girard
分類: cs.RO
原文アブストラクト
Robotic legs have bimodal operations: swing phases when the leg needs to move quickly in the air (high-speed, low-force) and stance phases when the leg bears the weight of the system (low-speed, high-force). Sizing a traditional single-ratio actuation system for such extremum operations leads to oversized heavy electric motor and poor energy efficiency, which hinder the capability of legged systems that bear the mass of their actuators and energy source. This paper explores an actuation concept where a hydrostatic transmission is dynamically reconfigured using valves to suit the requirements of each phase of a robotic leg. An analysis of the mass-delay-flow trade-off for the switching valve is presented. Then, a custom actuation system is built and integrated on a robotic leg test bench to evaluate the concept. Experimental results show that 1) small motorized ball valves can make fast transitions between operating modes when designed for this task, 2) the proposed operating principle and control schemes allow for seamless transitions, even during an impact with the ground and 3) the actuator characteristics address the needs of a leg bimodal operation in terms of force, speed and compliance.
