日本フィジカルAI新聞

世界のフィジカルAIを、日本語で。

ソフトロボティクス/触覚arXiv:2302.13141

傾斜多孔質構造を3Dプリントした固有感覚型ソフト流体アクチュエータ

3D Printed Proprioceptive Soft Fluidic Actuators with Graded Porosity

シェア:XThreadsFacebookLINEはてブBluesky

3Dプリントで導電性熱可塑性エラストマーの傾斜多孔質構造を作製し、駆動とひずみセンシングを一体化したソフトアクチュエータを実現。Wiener-Hammersteinモデルでヒステリシスを補償し高精度なひずみ推定を達成した。

著者: Nick Willemstein, Herman van der Kooij, Ali Sadeghi

分類: cs.RO

原文アブストラクト

Integration of both actuation and proprioception into the robot body would provide actuation and sensing in a single integrated system. Within this work, a manufacturing approach for such actuators is investigated that relies on 3D printing for fabricating soft-graded porous actuators with piezoresistive sensing and identified models for strain estimation. By 3D printing, a graded porous structure consisting of a conductive thermoplastic elastomer both mechanical programming for actuation and piezoresistive sensing were realized. Whereas identified Wiener-Hammerstein (WH) models estimate the strain by compensating the nonlinear hysteresis of the sensorized actuator. Three actuator types were investigated, namely: a bending actuator, a contractor, and a three DoF bending segment (3DoF). The porosity of the contractors was shown to enable the tailoring of both the stroke and resistance change. Furthermore, the WH models could provide strain estimation with on average high fits (83%) and low RMS errors (6%) for all three actuators, which outperformed linear models significantly (76.2/9.4% fit/RMS error). These results indicate that an integrated manufacturing approach with both 3D printed graded porous structures and system identification can realize sensorized actuators that can be tailored through porosity for both actuation and sensing behavior but also compensate for the nonlinear hysteresis.

関連論文

  1. 1Boston Dynamics、車輪付きAtlasの研究試作機を紹介研究・技術
  2. 2newmoとKDDIが資本業務提携 2028年に堺市で自動運転タクシー商用化目指す提携・買収
  3. 3GXOとApptronik、Apolloの物流現場試験を拡大 最大1,000台の展開を構想量産・展開
  4. 4NVIDIA、CoRLでGR00T 2とIsaac Lab 3.0を発表新製品・発表
  5. 5UC BerkeleyとNVIDIAの研究者、AIエージェントでロボット制御コードを仮想環境で改善研究・技術

PR・アフィリエイト広告

FRONTIER(GPU搭載BTOパソコン)

FRONTIER(GPU搭載BTOパソコン)の公式広告バナーFRONTIERでGPU搭載PCを見る ↗
PR本紙発行元 EmplifAI