予成形された蔓型ロボットの構成と製作
Configuration and Fabrication of Preformed Vine Robots
布やフィルムで作る成長型ソフトロボットに折り曲げを事前に作り込み、決まった経路を通らせるためのモデルと3種類の製作法を比較した研究。
著者: Nathaniel Agharese, Allison M. Okamura
分類: cs.RO
原文アブストラクト
Vine robots are a class of soft continuum robots that grow via tip eversion, allowing them to move their tip without relying on reaction forces from the environment. Constructed from compliant materials such as fabric and thin, flexible plastic, these robots are able to grow many times their original length with the use of fluidic pressure. They can be mechanically programmed/preformed to follow a desired path during growth by changing the structure of their body prior to deployment. We present a model for fabricating preformed vine robots with discrete bends. We apply this model across combinations of three fabrication methods and two materials. One fabrication method, taping folds into the robot body, is from the literature. The other two methods, welding folds and connecting fasteners embedded in the robot body, are novel. Measurements show the ability of the resulting vine robots to follow a desired path and show that fabrication method has a significant impact. Results include bend angles with as little as 0.12 degrees of error, and segment lengths with as low as 0.36 mm of error. The required growth pressure and average growth speed of these preformed vine robots ranged from 11.5 to 23.7kPA and 3.75 to 10 cm/s, respectively. These results validate the use of preformed vine robots for deployment along known paths, and serve as a guide for choosing a fabrication method and material combination based on the specific needs of the task.
関連論文
- 流体興奮性ニューロンのためのエネルギーベースモデリングソフトロボティクス
- 剛体マニピュレータの動きで受動腱駆動ソフト延長部を駆動・制御する手法ソフトロボティクス
- 太陽光で自走するサブグラム級ソフトロボットソフトロボティクス
- データ駆動によるソフトヘリコイドロボットの精密制御ソフトロボティクス
- PneuGen:LLMエージェントによるソフト空気圧ロボットのタスク駆動型協調設計ソフトロボティクス
- 柔軟トランクロボットの動的形状制御ソフトロボティクス
