宇宙ロボティクス向け地上ハードウェア・イン・ザ・ループシミュレーション施設の開発
Development of On-Ground Hardware In Loop Simulation Facility for Space Robotics
軌道上サービスやデブリ捕獲実験のための、2台のURアームと力覚センサ、モックアップを用いた地上HILS試験施設を開発し、ROS経由の把持アルゴリズムで軌道操作を検証した。
著者: Roshan Sah, Raunak Srivastava, Kaushik Das
分類: cs.RO, astro-ph.EP, cs.SY, eess.SY, math.OC, physics.space-ph
原文アブストラクト
Over a couple of decades, space junk has increased rapidly, which has caused significant threats to the LEO operation satellites. An Active Debris Removal $(ADR)$ concept continuously evolves for space junk removal. One of the ADR methods is Space Robotics, whose function is to chase, capture and de-orbit the space junk. This paper presents the development of an on-ground space robotics facility in the TCS Research for on-orbit servicing $(OOS)$ like refueling and debris capture experiments. A Hardware in Loop Simulation (HILS) system will be used for integrated system development, testing, and demonstration of on-orbit docking mechanisms. The HiLS test facility of TCS Research Lab will use two URs in which one UR is attached to the RG2 gripper, and the other is attached to a force-torque sensor and with a scaled mock-up model. The first UR5 will be mounted on a 7-axis linear rail and contain the docking probe. First, UR5 with a suitable gripper has to interface its control boxes. The grasping algorithm was run through the ROS interface line to demonstrate and validate the on-orbit operations. The manipulator will be mounted with LIDAR and a camera to visualize the mock-up model, find the target model's pose and rotational velocity estimation, and a gripper that will move relative to the target model. The other manipulator has the UR10 control, providing rotational and random motion to the mockup, enabling a dynamic simulator fed by force-torque data. The dynamic simulator is fed up with the orbit propagator, which will provide the orbiting environment to the target model. For the simulation of the docking and grasping of the target model, a linear rail of a 6m setup is still in the procurement process. Once reaching proximity, the grasping algorithm will be launched to capture the target model after reading the random motion of the mock-up model.
関連論文
- CHERI月面マイクロローバーの分離・展開システムの設計と実験的検証宇宙ロボティクス
- 宇宙科学のためのAI:軌道実験室・惑星フィールドワーク・身体性自律宇宙ロボティクス
- 小型月面探査ローバーHAKUTOの熱制御設計と実装宇宙ロボティクス
- 宇宙自律ロボティクスの基盤モデル:アーキテクチャ・物理適応・検証宇宙ロボティクス
- 宇宙機点検のための照明を考慮した能動的知覚宇宙ロボティクス
- 月面居住に向けた膨張式モジュールのロボット支援展開と保守:実地実証宇宙ロボティクス
