日本フィジカルAI新聞

世界のフィジカルAIを、日本語で。

設計最適化arXiv:2402.00032

準シリアルマニピュレータのための多目的生成設計フレームワークと実現:運動学的・動的性能を考慮して

Multi-objective Generative Design Framework and Realization for Quasi-serial Manipulator: Considering Kinematic and Dynamic Performance

シェア:XThreadsFacebookLINEはてブBluesky

準シリアルマニピュレータのリンク機構を対象タスクに合わせて最適化するフレームワークを提案し、2自由度機構のケーススタディを通じて、深層学習サロゲートモデルを用いた多目的最適化とデータマイニングによる設計指針抽出、3Dプリントによる実現と検証までを行った。

著者: Sumin Lee, Sunwoong Yang, Namwoo Kang

分類: cs.RO, cs.SY, eess.SY

原文アブストラクト

This paper proposes a framework that optimizes the linkage mechanism of the quasi-serial manipulator for target tasks. This process is explained through a case study of 2-degree-of-freedom linkage mechanisms, which significantly affect the workspace of the quasi-serial manipulator. First, a vast quasi-serial mechanism is generated with a workspace satisfying a target task and it converts it into a 3D CAD model. Then, the workspace and required torque performance of each mechanism are evaluated through kinematic and dynamic analysis. A deep learning-based surrogate model is leveraged to efficiently predict mechanisms and performance during the optimization process. After model training, a multi-objective optimization problem is formulated under the mechanical and dynamic conditions of the manipulator. The design goal of the manipulator is to recommend quasi-serial mechanisms with optimized kinematic (workspace) and dynamic (joint torque) performance that satisfies the target task. To investigate the underlying physics from the obtained Pareto solutions, various data mining techniques are performed to extract design rules that can provide practical design guidance. Finally, the manipulator was designed in detail for realization with 3D printed parts, including topology optimization. Also, the task-based optimized manipulator is verified through a payload test. Based on these results, the proposed framework has the potential for other real applications as realized cases and provides a reasonable design plan through the design rule extraction.

関連論文

  1. 1Boston Dynamics、車輪付きAtlasの研究試作機を紹介研究・技術
  2. 2newmoとKDDIが資本業務提携 2028年に堺市で自動運転タクシー商用化目指す提携・買収
  3. 3GXOとApptronik、Apolloの物流現場試験を拡大 最大1,000台の展開を構想量産・展開
  4. 4NVIDIA、CoRLでGR00T 2とIsaac Lab 3.0を発表新製品・発表
  5. 5UC BerkeleyとNVIDIAの研究者、AIエージェントでロボット制御コードを仮想環境で改善研究・技術

PR・アフィリエイト広告

FRONTIER(GPU搭載BTOパソコン)

FRONTIER(GPU搭載BTOパソコン)の公式広告バナーFRONTIERでGPU搭載PCを見る ↗
PR本紙発行元 EmplifAI