柔軟な脊椎を備えた剛性可変リンクセグメントによる可鍛性ロボット
Stiffness-Tuneable Limb Segment with Flexible Spine for Malleable Robots
層ジャミング式の剛性可変ロボットリンク内部に、脊椎に着想を得た柔軟な支持構造を導入し、大径でも曲げ時の変形を抑えて耐力を大幅に向上させた。
著者: Angus B. Clark, Nicolas Rojas
分類: cs.RO
原文アブストラクト
Robotic arms built from stiffness-adjustable, continuously bending segments serially connected with revolute joints have the ability to change their mechanical architecture and workspace, thus allowing high flexibility and adaptation to different tasks with less than six degrees of freedom, a concept that we call malleable robots. Known stiffening mechanisms may be used to implement suitable links for these novel robotic manipulators; however, these solutions usually show a reduced performance when bending due to structural deformation. By including an inner support structure this deformation can be minimised, resulting in an increased stiffening performance. This paper presents a new multi-material spine-inspired flexible structure for providing support in stiffness-controllable layer-jamming-based robotic links of large diameter. The proposed spine mechanism is highly movable with type and range of motions that match those of a robotic link using solely layer jamming, whilst maintaining a hollow and light structure. The mechanics and design of the flexible spine are explored, and a prototype of a link utilising it is developed and compared with limb segments based on granular jamming and layer jamming without support structure. Results of experiments verify the advantages of the proposed design, demonstrating that it maintains a constant central diameter across bending angles and presents an improvement of more than 203% of resisting force at 180 degrees.
