内部配線による安定性向上と積載能力増加を実現したモジュラー式腱駆動可変剛性マニピュレータ
A Modular, Tendon Driven Variable Stiffness Manipulator with Internal Routing for Improved Stability and Increased Payload Capacity
モジュラー式の腱駆動ビーズ型連続体マニピュレータを開発し、セクションごとの剛性制御と内部配線により、1kgの負荷でも姿勢を維持し、遠位部操作時の近位部のずれを70%以上低減した。
著者: Kyle L. Walker, Alix J. Partridge, Hsing-Yu Chen, Rahul R. Ramachandran, Adam A. Stokes, Kenjiro Tadakuma, Lucas Cruz da Silva, Francesco Giorgio-Serchi
分類: cs.RO
原文アブストラクト
Stability and reliable operation under a spectrum of environmental conditions is still an open challenge for soft and continuum style manipulators. The inability to carry sufficient load and effectively reject external disturbances are two drawbacks which limit the scale of continuum designs, preventing widespread adoption of this technology. To tackle these problems, this work details the design and experimental testing of a modular, tendon driven bead-style continuum manipulator with tunable stiffness. By embedding the ability to independently control the stiffness of distinct sections of the structure, the manipulator can regulate it's posture under greater loads of up to 1kg at the end-effector, with reference to the flexible state. Likewise, an internal routing scheme vastly improves the stability of the proximal segment when operating the distal segment, reducing deviations by at least 70.11%. Operation is validated when gravity is both tangential and perpendicular to the manipulator backbone, a feature uncommon in previous designs. The findings presented in this work are key to the development of larger scale continuum designs, demonstrating that flexibility and tip stability under loading can co-exist without compromise.
関連論文
- 航空エンジンその場検査のための超細径プッシュプル多節連続体マニピュレータの設計と制御連続体マニピュレータ
- 一般的な定曲率・定ねじれマニピュレータのための線形運動学連続体マニピュレータ
- 形状適応型ヒステリシス補償による腱駆動連続体マニピュレータの高精度先端制御連続体マニピュレータ
- 非円形関節を有する連続体マニピュレータ駆動の腔内治療用ロボットエレクトロスピニング連続体マニピュレータ
