小児用エクソスーツに向けた肩用双方向布製空気圧アクチュエータの力プロファイリング
Force Profiling of a Shoulder Bidirectional Fabric-based Pneumatic Actuator for a Pediatric Exosuit
小児用エクソスーツの肩の外転・内転を補助する双方向ソフト空気圧アクチュエータについて、取り付け位置や肘角度を変えて接触力を測定し、可動域を保ちつつ体幹・上腕への力を最小化する最適条件を明らかにした。
著者: Mehrnoosh Ayazi, Ipsita Sahin, Caio Mucchiani, Elena Kokkoni, Konstantinos Karydis
分類: cs.RO
原文アブストラクト
This paper presents a comprehensive analysis of the contact force profile of a single-cell bidirectional soft pneumatic actuator, specifically designed to aid in the abduction and adduction of the shoulder for pediatric exosuits. The actuator was embedded in an infant-scale test rig featuring two degrees of freedom: an actuated revolute joint supporting shoulder abduction/adduction and a passive (but lockable) revolute joint supporting elbow flexion/extension. Integrated load cells and an encoder within the rig were used to measure the force applied by the actuator and the shoulder joint angle, respectively. The actuator's performance was evaluated under various anchoring points and elbow joint angles. Experimental results demonstrate that optimal performance, characterized by maximum range of motion and minimal force applied on the torso and upper arm, can be achieved when the actuator is anchored at two-thirds the length of the upper arm, with the elbow joint positioned at a 90-degree angle. The force versus pressure and joint angle graphs reveal nonlinear and hysteresis behaviors. The findings of this study yield insights about optimal anchoring points and elbow angles to minimize exerted forces without reducing the range of motion.
