選択的果実収穫のためのタンデム駆動型コンパクトロボットグリッパ
Compact robotic gripper with tandem actuation for selective fruit harvesting
吸着と指の2段階駆動を組み合わせた小型グリッパを開発し、障害物を払いのけながら果実を把持して収穫する。把持力約40N、遮蔽環境での把持成功率96%以上を達成した。
著者: Alejandro Velasquez, Cindy Grimm, Joseph R. Davidson
分類: cs.RO, cs.SY, eess.SY
原文アブストラクト
Selective fruit harvesting is a challenging manipulation problem due to occlusions and clutter arising from plant foliage. A harvesting gripper should i) have a small cross-section, to avoid collisions while approaching the fruit; ii) have a soft and compliant grasp to adapt to different fruit geometry and avoid bruising it; and iii) be capable of rigidly holding the fruit tightly enough to counteract detachment forces. Previous work on fruit harvesting has primarily focused on using grippers with a single actuation mode, either suction or fingers. In this paper we present a compact robotic gripper that combines the benefits of both. The gripper first uses an array of compliant suction cups to gently attach to the fruit. After attachment, telescoping cam-driven fingers deploy, sweeping obstacles away before pivoting inwards to provide a secure grip on the fruit for picking. We present and analyze the finger design for both ability to sweep clutter and maintain a tight grasp. Specifically, we use a motorized test bed to measure grasp strength for each actuation mode (suction, fingers, or both). We apply a tensile force at different angles (0{\deg}, 15{\deg}, 30{\deg} and 45{\deg}), and vary the point of contact between the fingers and the fruit. We observed that with both modes the grasp strength is approximately 40 N. We use an apple proxy to test the gripper's ability to obtain a grasp in the presence of occluding apples and leaves, achieving a grasp success rate over 96% (with an ideal controller). Finally, we validate our gripper in a commercial apple orchard.
関連論文
- 経験時代における実世界コード・アズ・ポリシー:ACE-CaP-0マニピュレーション
- 把持のアドミタンスによる入出力特性評価:設計パラメータと把持挙動の接続マニピュレーション
- ManiLadder:カテゴリ別・多難易度タスクラダーによるロボットマニピュレーションのベンチマークマニピュレーション
- 成功確率を変える事象を記憶する:Criticゲート付きイベントメモリによる長期的マニピュレーションマニピュレーション
- BiPOP: 長期的な両腕ロボット操作のための部分順序計画マニピュレーション
- RUMI: 拡張現実と触覚フィードバックを備えたRobotiq対応の汎用マニピュレーションインターフェースマニピュレーション
