跳躍ロボットにおける最適化カルマンフィルタに基づく状態推定と高さ制御
Optimized Kalman Filter based State Estimation and Height Control in Hopping Robots
跳躍ロボットの跳躍高さ制御のため、慣性計測のみを用いた跳躍位相とカルマンフィルタを組み合わせた垂直状態推定器の学習手法を提案し、軽量なプロセッサで高精度な推定を実現した。
著者: Samuel Burns, Matthew Woodward
分類: cs.RO
原文アブストラクト
Rotor-based hopping locomotion significantly improves efficiency and operation time as compared to purely flying systems; where most hopping robots use the liftoff states and an assumed ballistic trajectory to determine the hopping height. However, significant aerial phase force (e.g., thrust and drag) can invalidate this assumption and lead to poor estimation performance. To combat this issue, a group has implemented multiple sensors (active and passive optical, inertial, and contact) and significant computational power to achieve full state estimation. This, however, poses a significant challenge to the development of light-weight, high-performance, low observable, jamming and electronic interference resistant hopping systems; especially in perceptually degraded environments (e.g., dust, smoke). Here we show a training procedure for a coupled hopping phase and Kalman filter-based vertical state estimator, requiring only inertial measurements, which is able to learn the characteristics of the target system, sensors, locomotion behaviors, environment, and acceleration measurement aliasing conditions. The resulting estimator, given hop heights up to 4 m and velocities up to $\pm7$ m/s, achieves a mean absolute percent error in the hop apex height of 12.5% with an aerial trajectory average normalized mean absolute error in position and velocity of 19% and 16.5%, respectively; while operating at 840 Hz, on a dual-core 240 MHz processor, with a total robot mass of 672 g. Due to the low mass and computational power, the presented estimator could also be used as a degraded operational mode in cases of sensor damage, malfunction, or occlusion in more complex robots.
