MRI対応プラスチック超音波モータの設計と特性評価
Design and Characterization of MRI-compatible Plastic Ultrasonic Motor
MRI環境下で使用可能なプラスチック製圧電超音波モータを開発し、歯数やノッチ寸法などのパラメータを最適化して回転速度を向上させた。
著者: Zhanyue Zhao, Charles Bales, Gregory Fischer
分類: cs.RO
原文アブストラクト
Precise surgical procedures may benefit from intra-operative image guidance using magnetic resonance imaging (MRI). However, the MRI's strong magnetic fields, fast switching gradients, and constrained space pose the need for an MR-guided robotic system to assist the surgeon. Piezoelectric actuators can be used in an MRI environment by utilizing the inverse piezoelectric effect for different application purposes. Piezoelectric ultrasonic motor (USM) is one type of MRI-compatible actuator that can actuate these robots with fast response times, compactness, and simple configuration. Although the piezoelectric motors are mostly made of nonferromagnetic material, the generation of eddy currents due to the MRI's gradient fields can lead to magnetic field distortions causing image artifacts. Motor vibrations due to interactions between the MRI's magnetic fields and those generated by the eddy currents can further degrade image quality by causing image artifacts. In this work, a plastic piezoelectric ultrasonic (USM) motor with more degree of MRI compatibility was developed and induced with preliminary optimization. Multiple parameters, namely teeth number, notch size, edge bevel or straight, and surface finish level parameters were used versus the prepressure for the experiment, and the results suggested that using 48 teeth, thin teeth notch with 0.39mm, beveled edge and a surface finish using grit number of approximate 1000 sandpaper performed a better output both in rotary speed and torque. Under this combination, the highest speed reached up to 436.6665rpm when the prepressure was low, and the highest torque reached up to 0.0348Nm when the prepressure was approximately 500g.
関連論文
- MRIスキャナ内ロボット用コンパクト直列弾性アクチュエータモジュールの設計と制御MRI対応アクチュエータ
- MRI誘導ロボット介入のための非磁性アクチュエータとしてのテスラタービンの可能性MRI対応アクチュエータ
