3〜4インチ下水圧送管検査に対応する実用的な多関節車輪型管内ロボットの開発
Development of a Practical Articulated Wheeled In-pipe Robot for Both 3-4 in Force Main Inspection of Sewer Pipes
防水・防塵設計で内径3〜4インチに適応する多関節車輪型管内検査ロボットAIRo-7.1を開発し、関節トルク制御と実環境実験で適応性を検証した。
著者: Kenya Murata, Atsushi Kakogawa
分類: cs.RO
原文アブストラクト
This paper reports a practical articulated wheeled in-pipe inspection robot "AIRo-7.1" which is waterproof and dustproof, and can adapt to 3 to 4 in inner diameters. The joint torque can be adjusted by a PWM open-loop control. The middle joint angle can be controlled by a position feedback control system while the other two joints are bent by torsional springs. Thanks to this simple and high-density design, not only downsizing of the robot but also wide range of the adaptive inner diameter were achieved. However, the relationship between the actual middle joint torque value and the PWM duty ratio should be pre-known because the reducer used in AIRo-7.1 was designed by ourselves. Therefore, preliminary experiments were conducted to clarify the relationship between them. To examine the adaptive movement, experiments in both 3 in and 4 in pipes with vertical, bend, and diameter change sections. Finally, field experiment was also conducted. From the results, high adaptability to different inner diameters of pipes and slippery environments were confirmed although waterproof and dustproof were not perfectly working.
