マルチセンサアレイとロボットによる制約維持を活用した薄膜ウェハ検査の高度化
Enhancing Thin-Film Wafer Inspection With A Multi-Sensor Array And Robot Constraint Maintenance
ロボットマニピュレータと学習した制約多様体を用いてウェハを校正点に制御し、大面積基板に拡張可能なマルチセンサアレイで薄膜厚さを検査する自律システムを提案した。
著者: Néstor Eduardo Sánchez-Arriaga, Ethan Canzini, Nathan John Espley-Plumb, Michael Farnsworth, Simon Pope, Adrian Leyland, Ashutosh Tiwari
分類: cs.RO, eess.SP
原文アブストラクト
Thin-film inspection on large-area substrates in coating manufacture remains a critical parameter to ensure product quality; however, extending the inspection process precisely over a large area presents major challenges, due to the limitations of the available inspection equipment. An additional manipulation problem arises when automating the inspection process, as the silicon wafer requires movement constraints to ensure accurate measurements and to prevent damage. Furthermore, there are other increasingly important large-area industrial applications, such as Roll-to-Roll (R2R) manufacturing where coating thickness inspection introduces additional challenges. This paper presents an autonomous inspection system using a robotic manipulator with a novel learned constraint manifold to control a wafer to its calibration point, and a novel multi-sensor array with high potential for scalability into large substrate areas. We demonstrate that the manipulator can perform required motions whilst adhering to movement constraints. We further demonstrate that the sensor array can perform thickness measurements statically with an error of $<2\%$ compared to a commercial reflectometer, and through the use of a manipulator can dynamically detect angle variations $>0.5^\circ$ from the calibration point whilst monitoring the RMSE and $R^2$ over 1406 data points. These features are potentially useful for detecting displacement variations in R2R manufacturing processes.
関連論文
- 経験時代における実世界コード・アズ・ポリシー:ACE-CaP-0マニピュレーション
- 把持のアドミタンスによる入出力特性評価:設計パラメータと把持挙動の接続マニピュレーション
- ManiLadder:カテゴリ別・多難易度タスクラダーによるロボットマニピュレーションのベンチマークマニピュレーション
- 成功確率を変える事象を記憶する:Criticゲート付きイベントメモリによる長期的マニピュレーションマニピュレーション
- BiPOP: 長期的な両腕ロボット操作のための部分順序計画マニピュレーション
- RUMI: 拡張現実と触覚フィードバックを備えたRobotiq対応の汎用マニピュレーションインターフェースマニピュレーション
