日本フィジカルAI新聞

世界のフィジカルAIを、日本語で。

医療ロボティクスarXiv:2504.19948

腱駆動同心管式経鼻内視鏡ロボット(TACTER)

Tendon-Actuated Concentric Tube Endonasal Robot (TACTER)

シェア:XThreadsFacebookLINEはてブBluesky

2本の腱駆動ロボットを同心に配置し、内側ロボットが外側内を軸方向に移動しながら屈曲することでfollow-the-leader動作を実現する経鼻手術用ロボットを提案し、Cosseratロッドモデルによる先端位置予測と屍体実験で検証した。

詳しい要約

1. どんなもの?

- 新規な endonasal robot『TACTER (Tendon-Actuated Concentric Tube Endonasal Robot)』の提案 - 2本の tendon-actuated robot を同心円状に配置した構造 - 外側: unidirectionally asymmetric notch (UAN) 構造の nickel-titanium robot - 内側: 3D-printed bidirectional robot に nickel-titanium bending member を組み合わせ - 外側・内側が独立に屈曲可能で、内側は外側内を軸方向に並進できる - EEA (endoscopic endonasal approaches) の狭い解剖学的空間での操作性向上を狙う

2. 先行研究と比べてどこがすごい?

- 従来の EEA では rigid scopes と rigid tools が狭い空間での操作や internal carotid artery・cranial nerves などの回避を困難にしていた - 本論文は『最初の tendon-actuated concentric tube (TACT) dexterous robotic tool』と位置づけ - 自然な鼻口内で follow-the-leader motion を実現し、EEA に通常必要な workspace をカバー可能と主張 - 具体的な先行研究名との定量的比較は要旨からは不明

3. 技術・手法の肝は?

- 同心配置された2つの tendon-actuated robot の設計が肝 - 外側: UAN nickel-titanium robot - 内側: 3D-printed bidirectional robot + nickel-titanium bending member - 内側 robot の外側 robot 内での軸方向並進により follow-the-leader motion を実現 - Cosserat-rod based mechanical model を提案 - 入力: 両 tendon-actuated robot の tendon tension と robot 間の相対並進量 - 出力: 入力パラメータ変化に対する TACTER tip position の予測

4. どうやって有効だと検証した?

- 提案する Cosserat-rod based mechanical model を実験により検証 - human cadaver experiment を実施し、nostril から sphenoid sinus までの maneuverability を実証 - 上記により EEA に必要な workspace をカバーできる操作性を示したと主張 - 定量的な精度指標や被験体数の詳細は要旨からは不明

5. 議論はある?

- 著者らは TACTER を最初の TACT dexterous robotic tool と位置づけ、follow-the-leader motion と EEA workspace のカバーを主張 - 限界・課題・failure mode に関する議論は要旨からは不明 - tendon tension や相対並進を入力とする model の汎化性・実環境での robustness に関する議論も要旨からは不明

6. 次に読むべき論文は?

- 要旨で参照/比較されている具体的な先行研究は明示されていない - 関連手法として concentric tube robot (CTR)、tendon-driven continuum robot、Cosserat rod model に関する文献 - follow-the-leader motion を扱う continuum/snake robot の研究 - EEA 向け surgical robotics の既存研究 - いずれも要旨に明示のないものは同分野の定番を一般名で挙げたものであり、個別論文の特定は要旨からは不明

※ AIが要旨から生成した要約です。正確性は原文をご確認ください。

著者: Kent K. Yamamoto, Tanner J. Zachem, Pejman Kheradmand, Patrick Zheng, Jihad Abdelgadir, Jared Laurance Bailey, Kaelyn Pieter, Patrick J. Codd, Yash Chitalia

分類: cs.RO

原文アブストラクト

Endoscopic endonasal approaches (EEA) have become more prevalent for minimally invasive skull base and sinus surgeries. However, rigid scopes and tools significantly decrease the surgeon's ability to operate in tight anatomical spaces and avoid critical structures such as the internal carotid artery and cranial nerves. This paper proposes a novel tendon-actuated concentric tube endonasal robot (TACTER) design in which two tendon-actuated robots are concentric to each other, resulting in an outer and inner robot that can bend independently. The outer robot is a unidirectionally asymmetric notch (UAN) nickel-titanium robot, and the inner robot is a 3D-printed bidirectional robot, with a nickel-titanium bending member. In addition, the inner robot can translate axially within the outer robot, allowing the tool to traverse through structures while bending, thereby executing follow-the-leader motion. A Cosserat-rod based mechanical model is proposed that uses tendon tension of both tendon-actuated robots and the relative translation between the robots as inputs and predicts the TACTER tip position for varying input parameters. The model is validated with experiments, and a human cadaver experiment is presented to demonstrate maneuverability from the nostril to the sphenoid sinus. This work presents the first tendon-actuated concentric tube (TACT) dexterous robotic tool capable of performing follow-the-leader motion within natural nasal orifices to cover workspaces typically required for a successful EEA.

関連論文

  1. 1Boston Dynamics、車輪付きAtlasの研究試作機を紹介研究・技術
  2. 2GXOとApptronik、Apolloの物流現場試験を拡大 最大1,000台の展開を構想量産・展開
  3. 3newmoとKDDIが資本業務提携 2028年に堺市で自動運転タクシー商用化目指す提携・買収
  4. 4NVIDIA、CoRLでGR00T 2とIsaac Lab 3.0を発表新製品・発表
  5. 5UC BerkeleyとNVIDIAの研究者、AIエージェントでロボット制御コードを仮想環境で改善研究・技術

PR・アフィリエイト広告

OZ GAMING(GPU搭載BTOゲーミングPC)

OZ GAMING(GPU搭載BTOゲーミングPC)の公式広告バナーOZ GAMINGで完成品PCを見る ↗
PR本紙発行元 EmplifAI