ジャガイモ塊茎からの高スループット組織サンプリングのための双腕ロボットシステムの設計・統合・評価
Design, Integration, and Evaluation of a Dual-Arm Robotic System for High Throughput Tissue Sampling from Potato Tubers
機械視覚誘導の双腕ロボットでジャガイモ塊茎から組織を自動採取するシステムを開発し、位置誤差1.84mm、成功率81.5%、サイクルタイム10.4秒を達成した。
詳しい要約
1. どんなもの?
2. 先行研究と比べてどこがすごい?
3. 技術・手法の肝は?
4. どうやって有効だと検証した?
5. 議論はある?
6. 次に読むべき論文は?
※ AIが要旨から生成した要約です。正確性は原文をご確認ください。
著者: Divyanth L. G., Syed Usama Bin Sabir, Divya Rathore, Lav R. Khot, Chakradhar Mattupalli, Manoj Karkee
分類: cs.RO
原文アブストラクト
Manual tissue extraction from potato tubers for molecular pathogen detection is highly laborious. This study presents a machine-vision-guided, dual-arm coordinated inline robotic system integrating tuber grasping and tissue sampling mechanisms. Tubers are transported on a conveyor that halts when a YOLOv11-based vision system detects a tuber within the workspace of a one-prismatic-degree-of-freedom (P-DoF) robotic arm. This arm, equipped with a gripping end-effector, secures and positions the tuber for sampling. The second arm, a 3-P-DoF Cartesian manipulator with a biopsy punch-based end-effector, then performs tissue extraction guided by a YOLOv10-based vision system that identifies the sampling sites on the tuber such as eyes or stolon scars. The sampling involves four stages: insertion of the punch into the tuber, punch rotation for tissue detachment, biopsy punch retraction, and deposition of the tissue core onto a collection site. The system achieved an average positional error of 1.84 mm along the tuber surface and a depth deviation of 1.79 mm from a 7.00 mm target. The success rate for core extraction and deposition was 81.5%, with an average sampling cycle of 10.4 seconds. The total cost of the system components was under $1,900, demonstrating the system's potential as a cost-effective alternative to labor-intensive manual tissue sampling. Future work will focus on optimizing for multi-site sampling from a single tuber and validation in commercial settings.
関連論文
- 経験時代における実世界コード・アズ・ポリシー:ACE-CaP-0マニピュレーション
- 把持のアドミタンスによる入出力特性評価:設計パラメータと把持挙動の接続マニピュレーション
- ManiLadder:カテゴリ別・多難易度タスクラダーによるロボットマニピュレーションのベンチマークマニピュレーション
- 成功確率を変える事象を記憶する:Criticゲート付きイベントメモリによる長期的マニピュレーションマニピュレーション
- BiPOP: 長期的な両腕ロボット操作のための部分順序計画マニピュレーション
- RUMI: 拡張現実と触覚フィードバックを備えたRobotiq対応の汎用マニピュレーションインターフェースマニピュレーション
