モデル予測制御を用いた軽量ハードウェアによる高速卓球スイング
High Speed Robotic Table Tennis Swinging Using Lightweight Hardware with Model Predictive Control
軽量・高トルク・低慣性の5自由度アームとモデル予測制御を組み合わせ、トップスピン・フラット・バックスピンの3種類のスイングを高精度・高出力で実現したロボット卓球システム。
詳しい要約
1. どんなもの?
2. 先行研究と比べてどこがすごい?
3. 技術・手法の肝は?
4. どうやって有効だと検証した?
5. 議論はある?
6. 次に読むべき論文は?
※ AIが要旨から生成した要約です。正確性は原文をご確認ください。
著者: David Nguyen, Kendrick D. Cancio, Sangbae Kim
分類: cs.RO, cs.SY, eess.SY
原文アブストラクト
We present a robotic table tennis platform that achieves a variety of hit styles and ball-spins with high precision, power, and consistency. This is enabled by a custom lightweight, high-torque, low rotor inertia, five degree-of-freedom arm capable of high acceleration. To generate swing trajectories, we formulate an optimal control problem (OCP) that constrains the state of the paddle at the time of the strike. The terminal position is given by a predicted ball trajectory, and the terminal orientation and velocity of the paddle are chosen to match various possible styles of hits: loops (topspin), drives (flat), and chops (backspin). Finally, we construct a fixed-horizon model predictive controller (MPC) around this OCP to allow the hardware to quickly react to changes in the predicted ball trajectory. We validate on hardware that the system is capable of hitting balls with an average exit velocity of 11 m/s at an 88% success rate across the three swing types.
関連論文
- 経験時代における実世界コード・アズ・ポリシー:ACE-CaP-0マニピュレーション
- 把持のアドミタンスによる入出力特性評価:設計パラメータと把持挙動の接続マニピュレーション
- ManiLadder:カテゴリ別・多難易度タスクラダーによるロボットマニピュレーションのベンチマークマニピュレーション
- 成功確率を変える事象を記憶する:Criticゲート付きイベントメモリによる長期的マニピュレーションマニピュレーション
- BiPOP: 長期的な両腕ロボット操作のための部分順序計画マニピュレーション
- RUMI: 拡張現実と触覚フィードバックを備えたRobotiq対応の汎用マニピュレーションインターフェースマニピュレーション
