連続体ロボットの形状センシングに向けた積層造形可能な伸縮性ひずみセンサの作製と特性評価
Fabrication and Characterization of Additively Manufactured Stretchable Strain Sensors Towards the Shape Sensing of Continuum Robots
直接インク書き込みで高粘度のガリウム-インジウム共晶インクを用いて伸縮性ひずみセンサを作製し、連続体ロボットの形状センシングへの応用可能性を示した。
詳しい要約
1. どんなもの?
2. 先行研究と比べてどこがすごい?
3. 技術・手法の肝は?
4. どうやって有効だと検証した?
5. 議論はある?
6. 次に読むべき論文は?
※ AIが要旨から生成した要約です。正確性は原文をご確認ください。
著者: Daniel C. Moyer, Wenpeng Wang, Logan S. Karschner, Loris Fichera, Pratap M. Rao
分類: cs.RO
原文アブストラクト
This letter describes the manufacturing and experimental characterization of novel stretchable strain sensors for continuum robots. The overarching goal of this research is to provide a new solution for the shape sensing of these devices. The sensors are fabricated via direct ink writing, an extrusion-based additive manufacturing technique. Electrically conductive material (i.e., the \textit{ink}) is printed into traces whose electrical resistance varies in response to mechanical deformation. The principle of operation of stretchable strain sensors is analogous to that of conventional strain gauges, but with a significantly larger operational window thanks to their ability to withstand larger strain. Among the different conductive materials considered for this study, we opted to fabricate the sensors with a high-viscosity eutectic Gallium-Indium ink, which in initial testing exhibited high linearity ($R^2 \approx$ 0.99), gauge factor $\approx$ 1, and negligible drift. Benefits of the proposed sensors include (i) ease of fabrication, as they can be conveniently printed in a matter of minutes; (ii) ease of installation, as they can simply be glued to the outside body of a robot; (iii) ease of miniaturization, which enables integration into millimiter-sized continuum robots.
