小型軽量航空機向け広速度・広角度域対応の微細多孔式気流センサ
Miniature multihole airflow sensor for lightweight aircraft over wide speed and angular range
小型ドローン向けに、電子回路を一体化した9gの多孔式圧力プローブを開発し、風洞実験で先端形状と孔間隔を検討した上で、3〜27m/s・迎角/横滑り角±35°で校正し、失速付近の屋外飛行で有効性を実証した。
詳しい要約
1. どんなもの?
2. 先行研究と比べてどこがすごい?
3. 技術・手法の肝は?
4. どうやって有効だと検証した?
5. 議論はある?
6. 次に読むべき論文は?
※ AIが要旨から生成した要約です。正確性は原文をご確認ください。
著者: Lukas Stuber, Simon Jeger, Raphael Zufferey, Dario Floreano
分類: cs.RO
原文アブストラクト
An aircraft's airspeed, angle of attack, and angle of side slip are crucial to its safety, especially when flying close to the stall regime. Various solutions exist, including pitot tubes, angular vanes, and multihole pressure probes. However, current sensors are either too heavy (>30 g) or require large airspeeds (>20 m/s), making them unsuitable for small uncrewed aerial vehicles. We propose a novel multihole pressure probe, integrating sensing electronics in a single-component structure, resulting in a mechanically robust and lightweight sensor (9 g), which we released to the public domain. Since there is no consensus on two critical design parameters, tip shape (conical vs spherical) and hole spacing (distance between holes), we provide a study on measurement accuracy and noise generation using wind tunnel experiments. The sensor is calibrated using a multivariate polynomial regression model over an airspeed range of 3-27 m/s and an angle of attack/sideslip range of +-35{\deg}, achieving a mean absolute error of 0.44 m/s and 0.16{\deg}. Finally, we validated the sensor in outdoor flights near the stall regime. Our probe enabled accurate estimations of airspeed, angle of attack and sideslip during different acrobatic manoeuvres. Due to its size and weight, this sensor will enable safe flight for lightweight, uncrewed aerial vehicles flying at low speeds close to the stall regime.
