多方向積層部品のためのワイヤアーク積層造形ロボットシステムの協調動作制御
Coordinated motion control of a wire arc additive manufacturing robotic system for multi-directional building parts
2台のロボット(溶接トーチとワーク保持テーブル)を協調制御し、積層方向を重力に合わせつつ複雑形状部品をWAAMで造形するアルゴリズムを提案・検証した。
詳しい要約
1. どんなもの?
2. 先行研究と比べてどこがすごい?
3. 技術・手法の肝は?
4. どうやって有効だと検証した?
5. 議論はある?
6. 次に読むべき論文は?
※ AIが要旨から生成した要約です。正確性は原文をご確認ください。
著者: Fernando Coutinho, Nicolas Lizarralde, Fernando Lizarralde
分類: cs.RO
原文アブストラクト
This work investigates the manufacturing of complex shapes parts with wire arc additive manufacturing (WAAM). In order to guarantee the integrity and quality of each deposited layer that composes the final piece, the deposition process is usually carried out in a flat position. However, for complex geometry parts with non-flat surfaces, this strategy causes unsupported overhangs and staircase effect, which contribute to a poor surface finishing. Generally, the build direction is not constant for every deposited section or layer in complex geometry parts. As a result, there is an additional concern to ensure the build direction is aligned with gravity, thus improving the quality of the final part. This paper proposes an algorithm to control the torch motion with respect to a deposition substrate as well as the torch orientation with respect to an inertial frame. The control scheme is based on task augmentation applied to an extended kinematic chain composed by two robots, which constitutes a coordinated control problem, and allows the deposition trajectory to be planned with respect to the deposition substrate coordinate frame while aligning each layer buildup direction with gravity (or any other direction defined for an inertial frame). Parts with complex geometry aspects have been produced in a WAAM cell composed by two robots (a manipulator with a welding torch and a positioning table holding the workpiece) in order to validate the proposed approach.
関連論文
- 経験時代における実世界コード・アズ・ポリシー:ACE-CaP-0マニピュレーション
- 把持のアドミタンスによる入出力特性評価:設計パラメータと把持挙動の接続マニピュレーション
- ManiLadder:カテゴリ別・多難易度タスクラダーによるロボットマニピュレーションのベンチマークマニピュレーション
- 成功確率を変える事象を記憶する:Criticゲート付きイベントメモリによる長期的マニピュレーションマニピュレーション
- BiPOP: 長期的な両腕ロボット操作のための部分順序計画マニピュレーション
- RUMI: 拡張現実と触覚フィードバックを備えたRobotiq対応の汎用マニピュレーションインターフェースマニピュレーション
