日本フィジカルAI新聞

世界のフィジカルAIを、日本語で。

マニピュレーションarXiv:2506.11570

深層学習による力覚を備えた多自由度劣駆動グリッパの構築

Construction of a Multiple-DOF Under-actuated Gripper with Force-Sensing via Deep Learning

シェア:XThreadsFacebookLINEはてブBluesky

力センサを使わずLSTMで接触力を推定し、1アクチュエータで平行・包み込み把持を切り替える3関節2指の劣駆動グリッパを開発した。

詳しい要約

1. どんなもの?

- 2本の3関節指を持つ新しいunder-actuated gripperを提案 - 力センサを用いずLSTM(Long Short-Term Memory)モデルによるdeep learningで力フィードバック制御を実現 - 単一アクチュエータと2本の3-phalange指からなる低コスト設計 - parallel graspingとenveloping graspingの自動切替を可能にする - 把持荷重・力・安定性・広い寸法範囲の物体把持を狙う

2. 先行研究と比べてどこがすごい?

- 力センサなしでLSTMにより力フィードバック制御を実現する点が特徴 - 単一アクチュエータの低コストunder-actuated構成 - double four-linkagesを重ねたfive-linkage機構でparallel/enveloping graspingを自動的に切替 - 機構のcoupling/decouplingにより荷重・力・安定性・寸法範囲の把持能力を狙う - 先行研究との具体的比較は要旨からは不明

3. 技術・手法の肝は?

- 指はdouble four-linkagesを重ねたfive-linkage mechanismで構成 - 単一アクチュエータで2本の3-phalange指を駆動 - kinematicsとpower transmissionの理論モデルを構築しfingertip位置とcontact forceを算出 - five-linkage mechanismsのcoupling/decouplingで把持モードを実現 - 電流の不確実性を統計手法で整理した上で、LSTMがgrasping modeを決定しcontact sensingを活用する力フィードバック制御方針を合成

4. どうやって有効だと検証した?

- payload、grasping force、force sensing、grasping stability、把持対象のdimension rangesなどの定量指標を測定する一連の実験を実施 - 実験により把持性能を検証し、高いversatilityとrobustnessを確認すると記載 - 具体的な実験条件・比較対象・数値は要旨からは不明

5. 議論はある?

- 力センサなしのLSTMによる力推定・制御の不確実性や汎化性に関する議論は要旨からは不明 - 電流の不確実性を統計手法で扱う点に言及があるが、詳細な限界は要旨からは不明 - 低コスト化と多機能性のトレードオフに関する議論は要旨からは不明

6. 次に読むべき論文は?

- LSTM(Long Short-Term Memory)を用いた力センシング/力制御の関連研究 - under-actuated gripperのfive-linkage mechanismやdouble four-linkagesに関する機構研究 - parallel graspingとenveloping graspingの切替に関する把持研究 - 電流ベースのcontact sensingや力推定に関する研究 - 要旨で参照/比較されている個別論文は不明

※ AIが要旨から生成した要約です。正確性は原文をご確認ください。

著者: Jihao Li, Keqi Zhu, Guodong Lu, I-Ming Chen, Huixu Dong

分類: cs.RO

原文アブストラクト

We present a novel under-actuated gripper with two 3-joint fingers, which realizes force feedback control by the deep learning technique- Long Short-Term Memory (LSTM) model, without any force sensor. First, a five-linkage mechanism stacked by double four-linkages is designed as a finger to automatically achieve the transformation between parallel and enveloping grasping modes. This enables the creation of a low-cost under-actuated gripper comprising a single actuator and two 3-phalange fingers. Second, we devise theoretical models of kinematics and power transmission based on the proposed gripper, accurately obtaining fingertip positions and contact forces. Through coupling and decoupling of five-linkage mechanisms, the proposed gripper offers the expected capabilities of grasping payload/force/stability and objects with large dimension ranges. Third, to realize the force control, an LSTM model is proposed to determine the grasping mode for synthesizing force-feedback control policies that exploit contact sensing after outlining the uncertainty of currents using a statistical method. Finally, a series of experiments are implemented to measure quantitative indicators, such as the payload, grasping force, force sensing, grasping stability and the dimension ranges of objects to be grasped. Additionally, the grasping performance of the proposed gripper is verified experimentally to guarantee the high versatility and robustness of the proposed gripper.

関連論文

  1. 1Boston Dynamics、車輪付きAtlasの研究試作機を紹介研究・技術
  2. 2newmoとKDDIが資本業務提携 2028年に堺市で自動運転タクシー商用化目指す提携・買収
  3. 3GXOとApptronik、Apolloの物流現場試験を拡大 最大1,000台の展開を構想量産・展開
  4. 4NVIDIA、CoRLでGR00T 2とIsaac Lab 3.0を発表新製品・発表
  5. 5UC BerkeleyとNVIDIAの研究者、AIエージェントでロボット制御コードを仮想環境で改善研究・技術

PR・アフィリエイト広告

MINISFORUM(ミニPC)

MINISFORUM(ミニPC)の公式広告バナーMINISFORUM公式ストアを見る ↗
PR本紙発行元 EmplifAI