ROS2向けFanuc CRXハードウェアインタフェースの設計と評価
ros2 fanuc interface: Design and Evaluation of a Fanuc CRX Hardware Interface in ROS2
Fanuc CRXロボットをROS2とMoveIt2に統合するハードウェアインタフェースを開発し、軌道追従や衝突回避などの性能を実験評価した。
詳しい要約
1. どんなもの?
2. 先行研究と比べてどこがすごい?
3. 技術・手法の肝は?
4. どうやって有効だと検証した?
5. 議論はある?
6. 次に読むべき論文は?
※ AIが要旨から生成した要約です。正確性は原文をご確認ください。
著者: Paolo Franceschi, Marco Faroni, Stefano Baraldo, Anna Valente
分類: cs.RO
原文アブストラクト
This paper introduces the ROS2 control and the Hardware Interface (HW) integration for the Fanuc CRX- robot family. It explains basic implementation details and communication protocols, and its integration with the Moveit2 motion planning library. We conducted a series of experiments to evaluate relevant performances in the robotics field. We tested the developed ros2_fanuc_interface for four relevant robotics cases: step response, trajectory tracking, collision avoidance integrated with Moveit2, and dynamic velocity scaling, respectively. Results show that, despite a non-negligible delay between command and feedback, the robot can track the defined path with negligible errors (if it complies with joint velocity limits), ensuring collision avoidance. Full code is open source and available at https://github.com/paolofrance/ros2_fanuc_interface.
