ケーブル駆動パラレルロボットの設計・製作・制御
Design, fabrication and control of a cable-driven parallel robot
3本のケーブルでペイロードを吊り下げるケーブル駆動パラレルロボットの実験装置を設計・製作し、基本的な開ループ動作計画アルゴリズムを検証した。
詳しい要約
1. どんなもの?
2. 先行研究と比べてどこがすごい?
3. 技術・手法の肝は?
4. どうやって有効だと検証した?
5. 議論はある?
6. 次に読むべき論文は?
※ AIが要旨から生成した要約です。正確性は原文をご確認ください。
著者: Dhruv Sorathiya, Sarthak Sahoo, Vivek Natarajan
分類: cs.RO, math.DS
原文アブストラクト
In cable driven parallel robots (CDPRs), the payload is suspended using a network of cables whose length can be controlled to maneuver the payload within the workspace. Compared to rigid link robots, CDPRs provide better maneuverability due to the flexibility of the cables and consume lesser power due to the high strength-to-weight ratio of the cables. However, amongst other things, the flexibility of the cables and the fact that they can only pull (and not push) render the dynamics of CDPRs complex. Hence advanced modelling paradigms and control algorithms must be developed to fully utilize the potential of CDPRs. Furthermore, given the complex dynamics of CDPRs, the models and control algorithms proposed for them must be validated on experimental setups to ascertain their efficacy in practice. We have recently developed an elaborate experimental setup for a CDPR with three cables and validated elementary open-loop motion planning algorithms on it. In this paper, we describe several aspects of the design and fabrication of our setup, including component selection and assembly, and present our experimental results. Our setup can reproduce complex phenomenon such as the transverse vibration of the cables seen in large CDPRs and will in the future be used to model and control such phenomenon and also to validate more sophisticated motion planning algorithms.
関連論文
- X-ACTA: 固定・移動ケーブル駆動パラレルロボットのための拡張解析中心張力分布アルゴリズムケーブル駆動ロボット
- ケーブル駆動パラレルロボットのタスクに応じた適応的プリロード制御ケーブル駆動ロボット
- ケーブル駆動パラレルロボットのための自動校正サブシステムケーブル駆動ロボット
- 補助カウンターバランスによるケーブル駆動パラレルロボットの作業空間解析と最適設計ケーブル駆動ロボット
- ハイブリッドケーブル駆動ロボットにおけるトルク最適化による冗長性解決と外乱抑制ケーブル駆動ロボット
- 柔軟ハイブリッドケーブル駆動ロボットの一般化モデリングと統合制御ケーブル駆動ロボット
