ロボットハンド・グリッパ向けフォトリフレクタ式小型高分解能張力センサ
A Miniature High-Resolution Tension Sensor Based on a Photo-Reflector for Robotic Hands and Grippers
腱駆動グリッパやロボットハンドに組み込める13mm角の小型張力センサを開発し、200Nまでの張力を9.9mNの分解能で計測できることを示した。
詳しい要約
1. どんなもの?
2. 先行研究と比べてどこがすごい?
3. 技術・手法の肝は?
4. どうやって有効だと検証した?
5. 議論はある?
6. 次に読むべき論文は?
※ AIが要旨から生成した要約です。正確性は原文をご確認ください。
著者: Hyun-Bin Kim, Kyung-Soo Kim
分類: cs.RO
原文アブストラクト
This paper presents a miniature tension sensor using a photo-reflector, designed for compact tendon-driven grippers and robotic hands. The proposed sensor has a small form factor of 13~mm x 7~mm x 6.5~mm and is capable of measuring tensile forces up to 200~N. A symmetric elastomer structure incorporating fillets and flexure hinges is designed based on Timoshenko beam theory and verified via FEM analysis, enabling improved sensitivity and mechanical durability while minimizing torsional deformation. The sensor utilizes a compact photo-reflector (VCNT2020) to measure displacement in the near-field region, eliminating the need for light-absorbing materials or geometric modifications required in photo-interrupter-based designs. A 16-bit analog-to-digital converter (ADC) and CAN-FD (Flexible Data-rate) communication enable efficient signal acquisition with up to 5~kHz sampling rate. Calibration experiments demonstrate a resolution of 9.9~mN (corresponding to over 14-bit accuracy) and a root mean square error (RMSE) of 0.455~N. Force control experiments using a twisted string actuator and PI control yield RMSEs as low as 0.073~N. Compared to previous research using photo-interrupter, the proposed method achieves more than tenfold improvement in resolution while also reducing nonlinearity and hysteresis. The design is mechanically simple, lightweight, easy to assemble, and suitable for integration into robotic and prosthetic systems requiring high-resolution force feedback.
