日本フィジカルAI新聞

世界のフィジカルAIを、日本語で。

マニピュレーションarXiv:2507.03925

接触多様体サンプリングを用いた複雑形状の安全なペグ挿入のための高精度姿勢推定

Accurate Pose Estimation Using Contact Manifold Sampling for Safe Peg-in-Hole Insertion of Complex Geometries

シェア:XThreadsFacebookLINEはてブBluesky

接触状態のみからペグと穴の相対的なSE(3)姿勢を推定し、複雑な形状のロボット組立を安全かつ高成功率で実現するフレームワークを提案。

詳しい要約

1. どんなもの?

- 複雑で非凸な形状・狭いクリアランスのロボット組立(peg-in-hole)を対象に、接触状態のみからpegのholeに対するfull SE(3) poseを推定する枠組み - オンラインで接触状態のsubmanifoldを構築し、offlineのcontact manifoldへ写像して精密なpose estimationを行う - 状態推定なしではjammingや過大な力による破損リスクがあると指摘

2. 先行研究と比べてどこがすごい?

- 従来のprimitive-based insertion(状態推定なし)と比較し、成功率的に大きく優位 - 5つの産業的に重要な複雑形状・0.1〜1.0 mmクリアランスで96.7%の成功率を達成 - これは状態推定なしのprimitive-based insertionに対し6xの改善 - 平均wrenchを有意に低減し、より安全で効率的なassemblyを実現

3. 技術・手法の肝は?

- 接触状態のみを入力として用い、pegのholeに対するfull SE(3) poseを推定 - primitive motionsによりオンラインで接触状態のsubmanifoldを構築(約6秒のオンライン実行) - 構築したオンラインsubmanifoldをofflineのcontact manifoldへマッピングし、精密なpose estimationを実現

4. どうやって有効だと検証した?

- 産業的に重要な5つの複雑geometry、0.1〜1.0 mmのclearanceで評価 - 成功率96.7%を達成し、状態推定なしのprimitive-based insertion比で6x改善を確認 - 挿入力(insertion forces)と全体の挿入時間(insertion times)を分析し、平均wrenchの有意な低減を示した

5. 議論はある?

- 状態推定なしではjammingや過剰な力印加、破損リスクがあると論じている - 平均wrench低減により安全性・効率性の向上を主張 - 具体的な限界や失敗ケース、汎化性に関する議論は要旨からは不明

6. 次に読むべき論文は?

- 要旨で比較対象として挙げられているprimitive-based insertion(状態推定なし)の関連研究 - contact manifold / submanifold を用いた状態推定に関する研究 - peg-in-hole insertionのassembly研究(一般的な関連分野として)

※ AIが要旨から生成した要約です。正確性は原文をご確認ください。

著者: Abhay Negi, Omey M. Manyar, Dhanush K. Penmetsa, Satyandra K. Gupta

分類: cs.RO

原文アブストラクト

Robotic assembly of complex, non-convex geometries with tight clearances remains a challenging problem, demanding precise state estimation for successful insertion. In this work, we propose a novel framework that relies solely on contact states to estimate the full SE(3) pose of a peg relative to a hole. Our method constructs an online submanifold of contact states through primitive motions with just 6 seconds of online execution, subsequently mapping it to an offline contact manifold for precise pose estimation. We demonstrate that without such state estimation, robots risk jamming and excessive force application, potentially causing damage. We evaluate our approach on five industrially relevant, complex geometries with 0.1 to 1.0 mm clearances, achieving a 96.7% success rate - a 6x improvement over primitive-based insertion without state estimation. Additionally, we analyze insertion forces, and overall insertion times, showing our method significantly reduces the average wrench, enabling safer and more efficient assembly.

関連論文

  1. 1Boston Dynamics、車輪付きAtlasの研究試作機を紹介研究・技術
  2. 2newmoとKDDIが資本業務提携 2028年に堺市で自動運転タクシー商用化目指す提携・買収
  3. 3GXOとApptronik、Apolloの物流現場試験を拡大 最大1,000台の展開を構想量産・展開
  4. 4NVIDIA、CoRLでGR00T 2とIsaac Lab 3.0を発表新製品・発表
  5. 5UC BerkeleyとNVIDIAの研究者、AIエージェントでロボット制御コードを仮想環境で改善研究・技術

PR・アフィリエイト広告

FRONTIER(GPU搭載BTOパソコン)

FRONTIER(GPU搭載BTOパソコン)の公式広告バナーFRONTIERでGPU搭載PCを見る ↗
PR本紙発行元 EmplifAI