RAPTAR: 協働ロボットによるレーダー放射パターン自動取得システム
RAPTAR: Radar Radiation Pattern Acquisition through Automated Collaborative Robotics
協働ロボットアームを用いて、実環境に近い状態でレーダーモジュールの3次元放射パターンを自動測定するポータブルシステムを開発した。
詳しい要約
1. どんなもの?
2. 先行研究と比べてどこがすごい?
3. 技術・手法の肝は?
4. どうやって有効だと検証した?
5. 議論はある?
6. 次に読むべき論文は?
※ AIが要旨から生成した要約です。正確性は原文をご確認ください。
著者: Maaz Qureshi, Mohammad Omid Bagheri, Abdelrahman Elbadrawy, William Melek, George Shaker
分類: cs.RO
原文アブストラクト
Accurate characterization of modern on-chip antennas remains challenging, as current probe-station techniques offer limited angular coverage, rely on bespoke hardware, and require frequent manual alignment. This research introduces RAPTAR (Radiation Pattern Acquisition through Robotic Automation), a portable, state-of-the-art, and autonomous system based on collaborative robotics. RAPTAR enables 3D radiation-pattern measurement of integrated radar modules without dedicated anechoic facilities. The system is designed to address the challenges of testing radar modules mounted in diverse real-world configurations, including vehicles, UAVs, AR/VR headsets, and biomedical devices, where traditional measurement setups are impractical. A 7-degree-of-freedom Franka cobot holds the receiver probe and performs collision-free manipulation across a hemispherical spatial domain, guided by real-time motion planning and calibration accuracy with RMS error below 0.9 mm. The system achieves an angular resolution upto 2.5 degree and integrates seamlessly with RF instrumentation for near- and far-field power measurements. Experimental scans of a 60 GHz radar module show a mean absolute error of less than 2 dB compared to full-wave electromagnetic simulations ground truth. Benchmarking against baseline method demonstrates 36.5% lower mean absolute error, highlighting RAPTAR accuracy and repeatability.
