日本フィジカルAI新聞

世界のフィジカルAIを、日本語で。

空中マニピュレーションarXiv:2508.19608

任意姿勢で飛行する全方向空中マニピュレータのロバスト制御と全身計画

Autonomous Aerial Manipulation at Arbitrary Pose in SE(3) with Robust Control and Whole-body Planning

シェア:XThreadsFacebookLINEはてブBluesky

全方向空中マニピュレータがSE(3)の任意の姿勢でホバリングし、ロバスト制御と全身運動計画により障害物近くで自律的にマニピュレーションを行うフレームワークを提案した。

詳しい要約

1. どんなもの?

- 本論文は、任意姿勢でホバリング可能な omnidirectional aerial manipulator (OAM) を用い、SE(3) 内の任意の6D poseで自律的な空中マニピュレーションを実現する枠組みを提示する。 - 構成は geometric robust control と whole-body motion planning の2要素からなる。 - 対象タスクは障害物近傍での把持・引き抜きなどで、90°や180°の pitch angle を含む複数シナリオで実証している。

2. 先行研究と比べてどこがすごい?

- 従来の conventional multirotor ベースの aerial manipulator はベースの underactuatedness のため小さな roll/pitch angle でしか manipulation できなかった。 - 本研究は OAM により任意姿勢でのホバリングを前提とし、任意の SE(3) pose にロボットを配置できるため manipulation workspace を大幅に拡張する。 - 元来不可能だった manipulation task を可能にする点が先行研究との違いとして示されている。

3. 技術・手法の肝は?

- floating base 向けに geometric robust controller を提案し、6D pose を制御しつつ、arm の運動や manipulation 中の interaction forces がベース安定性へ与える悪影響を緩和する。 - two-step optimization-based whole-body motion planner を設計し、floating base の pose と robotic arm の joint angles を同時に考慮して configuration space 全体を活用する。 - 二段階最適化により、非凸かつ非ユークリッドな探索空間での収束性を高め、real-time applicability を確保する。

4. どうやって有効だと検証した?

- OAM が複数シナリオで物体の grasping と pulling を行う実験を通じて有効性を実証している。 - シナリオには約90°および180°の pitch angles 近傍が含まれる。 - 障害物近傍で衝突なく高度な manipulation を自律実行できることを示している。

5. 議論はある?

- 要旨からは不明。 - ただし、arm 運動と interaction forces が floating base の安定性に影響する点、および非凸・非ユークリッド探索空間での最適化収束と real-time 性が設計上の課題として言及されている。

6. 次に読むべき論文は?

- 要旨で参照・比較されている個別研究は明示されていない。 - 関連手法として、conventional multirotor を用いた aerial manipulation、underactuated multirotor の制御、geometric control、whole-body motion planning、optimization-based planning を挙げる。

※ AIが要旨から生成した要約です。正確性は原文をご確認ください。

著者: Dongjae Lee, Byeongjun Kim, H. Jin Kim

分類: cs.RO

原文アブストラクト

Aerial manipulators based on conventional multirotors can conduct manipulation only in small roll and pitch angles due to the underactuatedness of the multirotor base. If the multirotor base is capable of hovering at arbitrary orientation, the robot can freely locate itself at any point in $\mathsf{SE}(3)$, significantly extending its manipulation workspace and enabling a manipulation task that was originally not viable. In this work, we present a geometric robust control and whole-body motion planning framework for an omnidirectional aerial manipulator (OAM). To maximize the strength of OAM, we first propose a geometric robust controller for a floating base. Since the motion of the robotic arm and the interaction forces during manipulation affect the stability of the floating base, the base should be capable of mitigating these adverse effects while controlling its 6D pose. We then design a two-step optimization-based whole-body motion planner, jointly considering the pose of the floating base and the joint angles of the robotic arm to harness the entire configuration space. The devised two-step approach facilitates real-time applicability and enhances convergence of the optimization problem with non-convex and non-Euclidean search space. The proposed approach enables the base to be stationary at any 6D pose while autonomously carrying out sophisticated manipulation near obstacles without any collision. We demonstrate the effectiveness of the proposed framework through experiments in which an OAM performs grasping and pulling of an object in multiple scenarios, including near $90^\circ$ and even $180^\circ$ pitch angles.

関連論文

  1. 1Boston Dynamics、車輪付きAtlasの研究試作機を紹介研究・技術
  2. 2newmoとKDDIが資本業務提携 2028年に堺市で自動運転タクシー商用化目指す提携・買収
  3. 3GXOとApptronik、Apolloの物流現場試験を拡大 最大1,000台の展開を構想量産・展開
  4. 4NVIDIA、CoRLでGR00T 2とIsaac Lab 3.0を発表新製品・発表
  5. 5UC BerkeleyとNVIDIAの研究者、AIエージェントでロボット制御コードを仮想環境で改善研究・技術

PR・アフィリエイト広告

MINISFORUM(ミニPC)

MINISFORUM(ミニPC)の公式広告バナーMINISFORUM公式ストアを見る ↗
PR本紙発行元 EmplifAI