Forbal: 5節リンク機構を用いた力平衡型2〜5自由度ロボットマニピュレータ
Forbal: Force Balanced 2-5 Degree of Freedom Robot Manipulator Built from a Five Bar Linkage
閉ループ平面5節リンクに基づく力平衡マニピュレータを設計し、2自由度のForbal-2と5自由度のForbal-5を試作して、関節トルクや反力モーメントの大幅な低減と位置精度向上を実験で示した。
詳しい要約
1. どんなもの?
2. 先行研究と比べてどこがすごい?
3. 技術・手法の肝は?
4. どうやって有効だと検証した?
5. 議論はある?
6. 次に読むべき論文は?
※ AIが要旨から生成した要約です。正確性は原文をご確認ください。
著者: Yash Vyas, Matteo Bottin
分類: cs.RO, cs.SY, eess.SY
原文アブストラクト
A force balanced manipulator design based on the closed chain planar five bar linkage is developed and experimentally validated. We present 2 variants as a modular design: Forbal-2, a planar 2-DOF manipulator, and its extension to 5-DOF spatial motion called Forbal-5. The design considerations in terms of geometric, kinematic, and dynamic design that fulfill the force balance conditions while maximizing workspace are discussed. Then, the inverse kinematics of both variants are derived from geometric principles. We validate the improvements from force balancing the manipulator through comparative experiments with counter mass balanced and unbalanced configurations. The results show how the balanced configuration yields a reduction in the average reaction moments of up to 66%, a reduction of average joint torques of up to 79%, as well as a noticeable reduction in position error for Forbal-2. For Forbal-5, which has a higher end effector payload mass, the joint torques are reduced up to 84% for the balanced configuration. Experimental results validate that the balanced manipulator design is suitable for applications where the reduction of joint torques and reaction forces/moments helps achieve millimeter level precision.
関連論文
- 経験時代における実世界コード・アズ・ポリシー:ACE-CaP-0マニピュレーション
- 把持のアドミタンスによる入出力特性評価:設計パラメータと把持挙動の接続マニピュレーション
- ManiLadder:カテゴリ別・多難易度タスクラダーによるロボットマニピュレーションのベンチマークマニピュレーション
- 成功確率を変える事象を記憶する:Criticゲート付きイベントメモリによる長期的マニピュレーションマニピュレーション
- BiPOP: 長期的な両腕ロボット操作のための部分順序計画マニピュレーション
- RUMI: 拡張現実と触覚フィードバックを備えたRobotiq対応の汎用マニピュレーションインターフェースマニピュレーション
