MinJointTracker: 関節位置推定と最小状態サイズを実現するリアルタイム慣性運動連鎖トラッキング
MinJointTracker: Real-time inertial kinematic chain tracking with joint position estimation and minimal state size
IMUのみを用いて、キャリブレーション不要で運動連鎖の関節位置と姿勢をリアルタイムに推定する軽量アルゴリズムを提案し、シミュレーションで有効性を示した。
詳しい要約
1. どんなもの?
2. 先行研究と比べてどこがすごい?
3. 技術・手法の肝は?
4. どうやって有効だと検証した?
5. 議論はある?
6. 次に読むべき論文は?
※ AIが要旨から生成した要約です。正確性は原文をご確認ください。
著者: Michael Lorenz, Bertram Taetz, Gabriele Bleser-Taetz, Didier Stricker
分類: cs.RO, cs.SY, eess.SY
原文アブストラクト
Inertial motion capture is a promising approach for capturing motion outside the laboratory. However, as one major drawback, most of the current methods require different quantities to be calibrated or computed offline as part of the setup process, such as segment lengths, relative orientations between inertial measurement units (IMUs) and segment coordinate frames (IMU-to-segment calibrations) or the joint positions in the IMU frames. This renders the setup process inconvenient. This work contributes to real-time capable calibration-free inertial tracking of a kinematic chain, i.e. simultaneous recursive Bayesian estimation of global IMU angular kinematics and joint positions in the IMU frames, with a minimal state size. Experimental results on simulated IMU data from a three-link kinematic chain (manipulator study) as well as re-simulated IMU data from healthy humans walking (lower body study) show that the calibration-free and lightweight algorithm provides not only drift-free relative but also drift-free absolute orientation estimates with a global heading reference for only one IMU as well as robust and fast convergence of joint position estimates in the different movement scenarios.
関連論文
- 慣性モーションキャプチャ問題へのスケーラブルな分散解法慣性モーションキャプチャ
