直線拘束に基づくハンドアイシステム用レーザー視覚センサの時空間キャリブレーション
Spatiotemporal Calibration for Laser Vision Sensor in Hand-eye System Based on Straight-line Constraint
溶接ロボットに搭載したレーザー視覚センサのカメラ遅延とハンドアイ外部パラメータの変動を、直線溶接線の拘束を用いた非線形最適化で同時にキャリブレーションする手法を提案した。
詳しい要約
1. どんなもの?
2. 先行研究と比べてどこがすごい?
3. 技術・手法の肝は?
4. どうやって有効だと検証した?
5. 議論はある?
6. 次に読むべき論文は?
※ AIが要旨から生成した要約です。正確性は原文をご確認ください。
著者: Peiwen Yang, Mingquan Jiang, Xinyue Shen, Heping Zhang
分類: cs.RO
原文アブストラクト
Laser vision sensors (LVS) are critical perception modules for industrial robots, facilitating real-time acquisition of workpiece geometric data in welding applications. However, the camera communication delay will lead to a temporal desynchronization between captured images and the robot motions. Additionally, hand-eye extrinsic parameters may vary during prolonged measurement. To address these issues, we introduce a measurement model of LVS considering the effect of the camera's time-offset and propose a teaching-free spatiotemporal calibration method utilizing line constraints. This method involves a robot equipped with an LVS repeatedly scanning straight-line fillet welds using S-shaped trajectories. Regardless of the robot's orientation changes, all measured welding positions are constrained to a straight-line, represented by Plucker coordinates. Moreover, a nonlinear optimization model based on straight-line constraints is established. Subsequently, the Levenberg-Marquardt algorithm (LMA) is employed to optimize parameters, including time-offset, hand-eye extrinsic parameters, and straight-line parameters. The feasibility and accuracy of the proposed approach are quantitatively validated through experiments on curved weld scanning. We open-sourced the code, dataset, and simulation report at https://anonymous.4open.science/r/LVS_ST_CALIB-015F/README.md.
