日本フィジカルAI新聞

世界のフィジカルAIを、日本語で。

マニピュレーションarXiv:2509.13998

柔軟で折りたたみ可能:ソフトな折り紙 inspired アクチュエータアレイを用いた作業空間解析と物体操作

Flexible and Foldable: Workspace Analysis and Object Manipulation Using a Soft, Interconnected, Origami-Inspired Actuator Array

シェア:XThreadsFacebookLINEはてブBluesky

折り紙 inspired の3自由度ロボットタイルを柔軟な表面層で連結した分散マニピュレータシステムを提案し、アクチュエータ密度を抑えつつ操作可能領域を1.84倍に拡大できることを示した。

詳しい要約

1. どんなもの?

- 3-DoF の origami-inspired robotic tiles を compliant surface layer で相互接続した新しい Distributed manipulator system (DMS) の提案 - 従来の DMS と異なり、actuator の end effector 上だけでなく、全 actuator をつなぐ柔軟な表面全体でも物体操作が可能 - 連続的で制御可能な操作面を実現するシステム

2. 先行研究と比べてどこがすごい?

- 既存 DMS は高い actuator 密度と object-to-actuator scale ratio の制約に依存し、適応性が限られていた - 提案手法は inter-tile connective material を活用し、actuator 数を増やさずに操作可能面積を x1.84 に拡大 - 従来の高密度アレイに比べ低コスト・低複雑性の代替を提供

3. 技術・手法の肝は?

- 3-DoF の origami-inspired robotic tiles のアレイを compliant surface layer で相互接続 - システムの combined workspace を解析し、simple motion primitives を導出 - 柔軟な接続面の flexibility を活かした操作戦略を導入

4. どうやって有効だと検証した?

- システムの combined workspace を解析 - simple motion primitives を導出 - 複数の tile にまたがる簡単な幾何学物体の translation を実演し、能力を実証

5. 議論はある?

- actuator 密度を大幅に削減しつつ操作面積を x1.84 に拡大できる点を主張 - 低コスト・低複雑性の代替として位置づけ - 相互接続面の柔軟性を活かす新しい操作戦略の可能性を示唆 - 具体的な限界や制約についての詳細は要旨からは不明

6. 次に読むべき論文は?

- 従来の Distributed manipulator system (DMS) に関する先行研究 - 高密度 actuator array を用いた manipulation 手法 - origami-inspired actuator / robotic tile に関する研究 - compliant surface を用いた manipulation に関する研究

※ AIが要旨から生成した要約です。正確性は原文をご確認ください。

著者: Bailey Dacre, Rodrigo Moreno, Serhat Demirtas, Ziqiao Wang, Yuhao Jiang, Jamie Paik, Kasper Stoy, Andrés Faíña

分類: cs.RO

原文アブストラクト

Object manipulation is a fundamental challenge in robotics, where systems must balance trade-offs among manipulation capabilities, system complexity, and throughput. Distributed manipulator systems (DMS) use the coordinated motion of actuator arrays to perform complex object manipulation tasks, seeing widespread exploration within the literature and in industry. However, existing DMS designs typically rely on high actuator densities and impose constraints on object-to-actuator scale ratios, limiting their adaptability. We present a novel DMS design utilizing an array of 3-DoF, origami-inspired robotic tiles interconnected by a compliant surface layer. Unlike conventional DMS, our approach enables manipulation not only at the actuator end effectors but also across a flexible surface connecting all actuators; creating a continuous, controllable manipulation surface. We analyse the combined workspace of such a system, derive simple motion primitives, and demonstrate its capabilities to translate simple geometric objects across an array of tiles. By leveraging the inter-tile connective material, our approach significantly reduces actuator density, increasing the area over which an object can be manipulated by x1.84 without an increase in the number of actuators. This design offers a lower cost and complexity alternative to traditional high-density arrays, and introduces new opportunities for manipulation strategies that leverage the flexibility of the interconnected surface.

関連論文

  1. 1Boston Dynamics、車輪付きAtlasの研究試作機を紹介研究・技術
  2. 2GXOとApptronik、Apolloの物流現場試験を拡大 最大1,000台の展開を構想量産・展開
  3. 3newmoとKDDIが資本業務提携 2028年に堺市で自動運転タクシー商用化目指す提携・買収
  4. 4NVIDIA、CoRLでGR00T 2とIsaac Lab 3.0を発表新製品・発表
  5. 5UC BerkeleyとNVIDIAの研究者、AIエージェントでロボット制御コードを仮想環境で改善研究・技術

PR・アフィリエイト広告

OZ GAMING(GPU搭載BTOゲーミングPC)

OZ GAMING(GPU搭載BTOゲーミングPC)の公式広告バナーOZ GAMINGで完成品PCを見る ↗
PR本紙発行元 EmplifAI