力計測とパーティクルフィルタによる接触位置と工具形状の同時推定
Simultaneous estimation of contact position and tool shape with high-dimensional parameters using force measurements and particle filtering
力覚信号とパーティクルフィルタを用いて、把持した工具と環境の接触位置と工具形状を高次元パラメータで同時に推定する手法を提案し、シミュレーションと実験で有効性を示した。
詳しい要約
1. どんなもの?
2. 先行研究と比べてどこがすごい?
3. 技術・手法の肝は?
4. どうやって有効だと検証した?
5. 議論はある?
6. 次に読むべき論文は?
※ AIが要旨から生成した要約です。正確性は原文をご確認ください。
著者: Kyo Kutsuzawa, Mitsuhiro Hayashibe
分類: cs.RO
原文アブストラクト
Estimating the contact state between a grasped tool and the environment is essential for performing contact tasks such as assembly and object manipulation. Force signals are valuable for estimating the contact state, as they can be utilized even when the contact location is obscured by the tool. Previous studies proposed methods for estimating contact positions using force/torque signals; however, most methods require the geometry of the tool surface to be known. Although several studies have proposed methods that do not require the tool shape, these methods require considerable time for estimation or are limited to tools with low-dimensional shape parameters. Here, we propose a method for simultaneously estimating the contact position and tool shape, where the tool shape is represented by a grid, which is high-dimensional (more than 1000 dimensional). The proposed method uses a particle filter in which each particle has individual tool shape parameters, thereby to avoid directly handling a high-dimensional parameter space. The proposed method is evaluated through simulations and experiments using tools with curved shapes on a plane. Consequently, the proposed method can estimate the shape of the tool simultaneously with the contact positions, making the contact-position estimation more accurate.
