日本フィジカルAI新聞

世界のフィジカルAIを、日本語で。

医療ロボティクスarXiv:2510.12332

形状を考慮した連続体ロボットの全身制御:内腔外科手術への応用

Shape-Aware Whole-Body Control for Continuum Robots with Application in Endoluminal Surgical Robotics

シェア:XThreadsFacebookLINEはてブBluesky

腱駆動連続体ロボットの形状を考慮した全身制御フレームワークを提案し、気管支鏡検査ファントムで従来法より安全で正確な内腔追従を実現した。

詳しい要約

1. どんなもの?

- tendon-driven continuum robot 向けの shape-aware whole-body control framework を提示 - 対象応用は endoluminal surgical navigation(bronchoscopy など) - tip だけでなく backbone 形状の追従・障害物回避を同時に扱う - physics-informed backbone model と residual learning(Augmented Neural ODE)を組み合わせる - sampling-based な MPPI controller と task manager を統合した制御系

2. 先行研究と比べてどこがすごい?

- 従来の tip-only control は壁接触・組織損傷・遠位到達失敗を招きやすいと指摘 - 提案法は tip tracking に加え backbone conformance と obstacle avoidance を同時最適化 - joystick-only navigation や既存 baselines と比較して lumen-following 精度向上・壁接触低減を示す - task manager により tele-operation 中も目的(wall clearance 等)をリアルタイム調整可能 - 形状推定と Jacobian 計算を効率化する点が差分として主張される

3. 技術・手法の肝は?

- physics-informed backbone model で continuum robot の形状を表現 - Augmented Neural ODE による residual learning でモデル誤差を補償 - これにより accurate shape estimation と efficient Jacobian computation を実現 - sampling-based Model Predictive Path Integral (MPPI) controller が actuation constraints 下で最適化 - 目的関数は tip tracking・backbone conformance・obstacle avoidance の joint optimization - task manager が tele-operation 中の目的重みや方針を調整

4. どうやって有効だと検証した?

- 複数シナリオの simulation studies を実施 - trajectory tracking、dynamic obstacle avoidance、shape-constrained reaching を評価 - millimeter-level accuracy を報告 - bronchoscopy phantom 上の real-robot experiments で検証 - joystick-only navigation および既存 baselines と比較し、lumen-following 精度・壁接触・適応性を評価

5. 議論はある?

- 提案法は安全性・信頼性・operator efficiency の向上可能性を示す - 限定的・安全-critical な環境への広い適用可能性に言及 - ただし要旨からは、計算コスト、real-time 性の定量評価、失敗事例、一般化限界の詳細は不明 - 比較対象や評価指標の詳細、統計的有意性も要旨からは不明

6. 次に読むべき論文は?

- Augmented Neural ODE の原論文(residual learning の基礎) - Model Predictive Path Integral (MPPI) control の原論文 - tendon-driven continuum robot の形状推定・制御に関する関連研究 - bronchoscopy 向け surgical navigation / tip-only control の既存研究 - physics-informed modeling と learning-based residual を組み合わせた continuum robot 研究

※ AIが要旨から生成した要約です。正確性は原文をご確認ください。

著者: Mohammadreza Kasaei, Mostafa Ghobadi, Mohsen Khadem

分類: cs.RO

原文アブストラクト

This paper presents a shape-aware whole-body control framework for tendon-driven continuum robots with direct application to endoluminal surgical navigation. Endoluminal procedures, such as bronchoscopy, demand precise and safe navigation through tortuous, patient-specific anatomy where conventional tip-only control often leads to wall contact, tissue trauma, or failure to reach distal targets. To address these challenges, our approach combines a physics-informed backbone model with residual learning through an Augmented Neural ODE, enabling accurate shape estimation and efficient Jacobian computation. A sampling-based Model Predictive Path Integral (MPPI) controller leverages this representation to jointly optimize tip tracking, backbone conformance, and obstacle avoidance under actuation constraints. A task manager further enhances adaptability by allowing real-time adjustment of objectives, such as wall clearance or direct advancement, during tele-operation. Extensive simulation studies demonstrate millimeter-level accuracy across diverse scenarios, including trajectory tracking, dynamic obstacle avoidance, and shape-constrained reaching. Real-robot experiments on a bronchoscopy phantom validate the framework, showing improved lumen-following accuracy, reduced wall contacts, and enhanced adaptability compared to joystick-only navigation and existing baselines. These results highlight the potential of the proposed framework to increase safety, reliability, and operator efficiency in minimally invasive endoluminal surgery, with broader applicability to other confined and safety-critical environments.

関連論文

  1. 1Boston Dynamics、車輪付きAtlasの研究試作機を紹介研究・技術
  2. 2newmoとKDDIが資本業務提携 2028年に堺市で自動運転タクシー商用化目指す提携・買収
  3. 3GXOとApptronik、Apolloの物流現場試験を拡大 最大1,000台の展開を構想量産・展開
  4. 4NVIDIA、CoRLでGR00T 2とIsaac Lab 3.0を発表新製品・発表
  5. 5UC BerkeleyとNVIDIAの研究者、AIエージェントでロボット制御コードを仮想環境で改善研究・技術

PR・アフィリエイト広告

MINISFORUM(ミニPC)

MINISFORUM(ミニPC)の公式広告バナーMINISFORUM公式ストアを見る ↗
PR本紙発行元 EmplifAI