その場フォトグラメトリ再構成のためのベッド回転機構の設計
Design of a Bed Rotation Mechanism to Facilitate In-Situ Photogrammetric Reconstruction of Printed Parts
FDM 3Dプリンティング研究用のオープンなテストベッドを開発し、印刷中の加熱ベッドを回転させてその場でフォトグラメトリ計測を行う機構を設計した。
詳しい要約
1. どんなもの?
2. 先行研究と比べてどこがすごい?
3. 技術・手法の肝は?
4. どうやって有効だと検証した?
5. 議論はある?
6. 次に読むべき論文は?
※ AIが要旨から生成した要約です。正確性は原文をご確認ください。
著者: Travis A. Roberts, Sourabh Karmakar, Cameron J. Turner
分類: cs.RO
原文アブストラクト
Additive manufacturing, or 3D printing, is a complex process that creates free-form geometric objects by sequentially placing material to construct an object, usually in a layer-by-layer process. One of the most widely used methods is Fused Deposition Modeling (FDM). FDM is used in many of the consumer-grade polymer 3D printers available today. While consumer grade machines are cheap and plentiful, they lack many of the features desired in a machine used for research purposes and are often closed-source platforms. Commercial-grade models are more expensive and are also usually closed-source platforms that do not offer flexibility for modifications often needed for research. The authors designed and fabricated a machine to be used as a test bed for research in the field of polymer FDM processes. The goal was to create a platform that tightly controls and/or monitors the FDM build parameters so that experiments can be repeated with a known accuracy. The platform offers closed loop position feedback, control of the hot end and bed temperature, and monitoring of environment temperature and humidity. Additionally, the platform is equipped with cameras and a mechanism for in-situ photogrammetry, creating a geometric record of the printing throughout the printing process. Through photogrammetry, backtracking and linking process parameters to observable geometric defects can be achieved. This paper focuses on the design of a novel mechanism for spinning the heated bed to allow for photogrammetric reconstruction of the printed part using a minimal number of cameras, as implemented on this platform.
