知能制御とIoTを活用したロボットアーム式積層造形における欠陥軽減
Defect Mitigation for Robot Arm-based Additive Manufacturing Utilizing Intelligent Control and IOT
6自由度ロボットアームとカメラを用いた積層造形システムで、熱制御と画像認識による欠陥検出・自動再押出しを実現し、印刷を止めずに表面欠陥を修正できることを示した。
詳しい要約
1. どんなもの?
2. 先行研究と比べてどこがすごい?
3. 技術・手法の肝は?
4. どうやって有効だと検証した?
5. 議論はある?
6. 次に読むべき論文は?
※ AIが要旨から生成した要約です。正確性は原文をご確認ください。
著者: Matsive Ali, Blake Gassen, Sen Liu
分類: cs.RO, cs.SY, eess.SY
原文アブストラクト
This paper presents an integrated robotic fused deposition modeling additive manufacturing system featuring closed-loop thermal control and intelligent in-situ defect correction using a 6-degree of freedom robotic arm and an Oak-D camera. The robot arm end effector was modified to mount an E3D hotend thermally regulated by an IoT microcontroller, enabling precise temperature control through real-time feedback. Filament extrusion system was synchronized with robotic motion, coordinated via ROS2, ensuring consistent deposition along complex trajectories. A vision system based on OpenCV detects layer-wise defects position, commanding autonomous re-extrusion at identified sites. Experimental validation demonstrated successful defect mitigation in printing operations. The integrated system effectively addresses challenges real-time quality assurance. Inverse kinematics were used for motion planning, while homography transformations corrected camera perspectives for accurate defect localization. The intelligent system successfully mitigated surface anomalies without interrupting the print process. By combining real-time thermal regulation, motion control, and intelligent defect detection & correction, this architecture establishes a scalable and adaptive robotic additive manufacturing framework suitable for aerospace, biomedical, and industrial applications.
