ソフトロボット向け流体論理演算を可能にする柔軟流体シートトランジスタ
Soft Fluidic Sheet Transistor for Soft Robotic System Enabling Fluid Logic Operations
空気圧信号だけで論理演算できる柔軟なウレタンシート状バルブを開発し、複数組み合わせてラッチ回路や触覚検知・流体アクチュエータを統合したソフトロボットを試作した。
詳しい要約
1. どんなもの?
2. 先行研究と比べてどこがすごい?
3. 技術・手法の肝は?
4. どうやって有効だと検証した?
5. 議論はある?
6. 次に読むべき論文は?
※ AIが要旨から生成した要約です。正確性は原文をご確認ください。
著者: Yuki Origane, Koya Cho, Hideyuki Tsukagoshi
分類: cs.RO
原文アブストラクト
Aiming to achieve both high functionality and flexibility in soft robot system, this paper presents a soft urethane sheet-like valve with an amplifier that can perform logical operations using only pneumatic signals. When the control chamber in the valve is pressurized, the main path is compressed along its central axis, buckling and being pressed,resulting in blockage. This allows control by a pressure signal smaller than that within the main channel. Furthermore, similar to transistors in electrical circuits, when combined, the proposed valve can perform a variety of logical operations. The basic type operates as a NOT logic element, which is named the fluidic sheet transistor (FST). By integrating multiple FSTs, logical operations such as positive logic, NAND, and NOR can be performed on a single sheet. This paper describes the operating principle, fabrication method, and characteristics of the FST,followed by a method for configuring logical operations.Moreover, we demonstrate the construction of a latch circuit(self-holding logic circuit) using FST, introducing a prototype of a fluid robot system that combines a tactile tube as a fluidic detector and fluid actuators. This demonstrates that it is possible to generate behavior that actively changes posture when hitting an obstacle using only air pressure from a single pipe, which verifies the effectiveness of the proposed methods.
