日本フィジカルAI新聞

世界のフィジカルAIを、日本語で。

遠隔操作arXiv:2511.22467

遠隔操作車両におけるモーション・トゥ・モーション遅延計測フレームワーク

Motion-to-Motion Latency Measurement Framework for Connected and Autonomous Vehicle Teleoperation

シェア:XThreadsFacebookLINEはてブBluesky

ホール効果センサと同期したRaspberry Pi 5を用いて、遠隔操作者のステアリング操作から車両のステアリング動作までの遅延(M2M遅延)を計測するフレームワークを提案し、実測でアクチュエータ遅延が支配的であることを示した。

詳しい要約

1. どんなもの?

- Connected and Autonomous Vehicles (CAVs) の teleoperation における Motion-to-Motion (M2M) latency を測定するフレームワークを提案した論文 - M2M latency を『遠隔オペレータの物理的なステアリング操作と車両側の対応するステアリング動作の間の遅延』と定義 - Hall-effect sensors と 2 台の同期した Raspberry Pi 5 を用いて計測する - 既存研究が主に扱う Glass-to-Glass (G2G) latency ではなく、操作入力から車両動作までの遅延に着目

2. 先行研究と比べてどこがすごい?

- 既存研究の多くは video pipeline の遅延のみを捉える Glass-to-Glass (G2G) latency に焦点 - M2M latency については標準的な測定手法が存在しなかった - 本論文は teleoperation architecture に依存せず M2M latency を推定できる測定フレームワークを提示 - 精度 10–15 ms の計測を実現した点を示す

3. 技術・手法の肝は?

- Hall-effect sensors をステアリング操作側と車両側に用いる - 2 台の同期した Raspberry Pi 5 で両側のタイムスタンプを取得 - interrupt-based timestamps を両側で記録し、その差分から M2M latency を推定 - 測定は underlying teleoperation architecture から独立して行える設計

4. どうやって有効だと検証した?

- Precision tests により 10–15 ms の精度を確認 - Field results により実環境での M2M latency を計測 - Field results では actuator delays が M2M latency を支配し、median values が 750 ms を超えることを示した

5. 議論はある?

- Field results から actuator delays が M2M latency の主要因であることを議論 - median values が 750 ms を超えるという結果が示されている - その他の議論や限界については要旨からは不明

6. 次に読むべき論文は?

- Glass-to-Glass (G2G) latency に関する既存研究 - Connected and Autonomous Vehicle (CAV) teleoperation の遅延評価に関する研究 - Hall-effect sensor を用いた計測手法や Raspberry Pi 5 による同期計測に関する文献(要旨で具体的な参照論文は示されていないため、同分野の関連手法を一般名で挙げる)

※ AIが要旨から生成した要約です。正確性は原文をご確認ください。

著者: François Provost, Faisal Hawlader, Mehdi Testouri, Raphaël Frank

分類: cs.PF, cs.RO

原文アブストラクト

Latency is a key performance factor for the teleoperation of Connected and Autonomous Vehicles (CAVs). It affects how quickly an operator can perceive changes in the driving environment and apply corrective actions. Most existing work focuses on Glass-to-Glass (G2G) latency, which captures delays only in the video pipeline. However, there is no standard method for measuring Motion-to-Motion (M2M) latency, defined as the delay between the physical steering movement of the remote operator and the corresponding steering motion in the vehicle. This paper presents an M2M latency measurement framework that uses Hall-effect sensors and two synchronized Raspberry Pi~5 devices. The system records interrupt-based timestamps on both sides to estimate M2M latency, independently of the underlying teleoperation architecture. Precision tests show an accuracy of 10--15~ms, while field results indicate that actuator delays dominate M2M latency, with median values above 750~ms.

関連論文

  1. 1Boston Dynamics、車輪付きAtlasの研究試作機を紹介研究・技術
  2. 2newmoとKDDIが資本業務提携 2028年に堺市で自動運転タクシー商用化目指す提携・買収
  3. 3GXOとApptronik、Apolloの物流現場試験を拡大 最大1,000台の展開を構想量産・展開
  4. 4NVIDIA、CoRLでGR00T 2とIsaac Lab 3.0を発表新製品・発表
  5. 5UC BerkeleyとNVIDIAの研究者、AIエージェントでロボット制御コードを仮想環境で改善研究・技術

PR・アフィリエイト広告

OZ GAMING(GPU搭載BTOゲーミングPC)

OZ GAMING(GPU搭載BTOゲーミングPC)の公式広告バナーOZ GAMINGで完成品PCを見る ↗
PR本紙発行元 EmplifAI