超音波スキャン用ケーブル駆動同軸球面パラレルメカニズムのパラメトリック設計
Parametric Design of a Cable-Driven Coaxial Spherical Parallel Mechanism for Ultrasound Scans
医療遠隔操作の触覚インタフェース向けに、ケーブル駆動同軸球面パラレルメカニズムを設計し、運動学解析と試作機で機構の実現可能性を検証した。
詳しい要約
1. どんなもの?
2. 先行研究と比べてどこがすごい?
3. 技術・手法の肝は?
4. どうやって有効だと検証した?
5. 議論はある?
6. 次に読むべき論文は?
※ AIが要旨から生成した要約です。正確性は原文をご確認ください。
著者: Maryam Seraj, Mohammad Hossein Kamrava, Carlo Tiseo
分類: cs.RO, physics.class-ph
原文アブストラクト
Haptic interfaces play a critical role in medical teleoperation by enabling surgeons to interact with remote environments through realistic force and motion feedback. Achieving high fidelity in such systems requires balancing the trade-offs among workspace, dexterity, stiffness, inertia, and bandwidth, particularly in applications demanding pure rotational motion. This paper presents the design methodology and kinematic analysis of a Cable-Driven Coaxial Spherical Parallel Mechanism (CDC-SPM) developed to address these challenges. The proposed approach focuses on the mechanical design and parametric synthesis of the mechanism to meet task-specific requirements in medical applications. In particular, the design enables the relocation of the center of rotation to an external point corresponding to the tool-tissue interaction, while ensuring appropriate workspace coverage and collision avoidance. The proposed cable-driven interface design allows for reducing the mass placed at the robot arm end-effector, thereby minimizing inertial loads, enhancing stiffness, and improving dynamic responsiveness. Through parallel and coaxial actuation, the mechanism achieves decoupled rotational degrees of freedom with isotropic force and torque transmission. A prototype is developed to validate the mechanical feasibility and kinematic behavior of the proposed mechanism. These results demonstrate the suitability of the proposed mechanism design for future integration into haptic interfaces for medical applications such as ultrasound imaging.
