日本フィジカルAI新聞

世界のフィジカルAIを、日本語で。

マニピュレーションarXiv:2512.08767

マニピュレータロボットのデータ駆動型動的パラメータ学習

Data-Driven Dynamic Parameter Learning of manipulator robots

シェア:XThreadsFacebookLINEはてブBluesky

Transformerを用いてマニピュレータの動的パラメータを推定し、自動生成した多様なロボットモデルと軌道データで学習することで、高精度な推定を実現した。

詳しい要約

1. どんなもの?

- マニピュレータロボットの動的パラメータ(質量・慣性・摩擦など)をデータ駆動で推定する研究 - Transformer ベースの推定モデルを提案 - 多様なロボットモデルと軌道データを自動生成するパイプラインを構築 - 8,192 体のロボットからなるデータセットを使用 - sim-to-real ギャップの橋渡しを目指す

2. 先行研究と比べてどこがすごい?

- 従来の解析的アプローチは複雑な構造・相互作用に対応しにくい - 従来の neural network(recurrent models など)は長距離依存を捉えにくい - 提案手法は attention 機構で時間的・空間的依存を同時に捉える - 自動データセット生成パイプラインを組み合わせ、スケーラブルな推定を実現 - 具体的な先行研究名の比較は要旨からは不明

3. 技術・手法の肝は?

- Transformer ベースの動的パラメータ推定モデル - Jacobian 由来の特徴量で軌道データを enrich - 慣性・摩擦特性を変化させた 8,192 体のロボットモデルを自動生成 - attention 機構により temporal と spatial の依存を捕捉 - 最良構成は sequence length 64、64 Hz、4 layers、32 heads

4. どうやって有効だと検証した?

- 生成データセット上で validation R2 を評価 - 最良構成で validation R2 = 0.8633 を達成 - Mass と inertia はほぼ完全な精度 - Coulomb friction は中〜高精度 - viscous friction と distal link center-of-mass はより困難 - sequence length・sampling rate・architecture の影響を実験的に比較

5. 議論はある?

- viscous friction と distal link center-of-mass の推定精度が課題 - sequence length・sampling rate・architecture が性能に影響 - 自動データセット生成と kinematic enrichment の組み合わせが有効 - sim-to-real transfer 改善への貢献を示唆 - 実機検証や限界に関する詳細は要旨からは不明

6. 次に読むべき論文は?

- Transformer ベースの動的パラメータ推定の関連研究 - recurrent models を用いた動的パラメータ推定の先行研究 - sim-to-real transfer に関する研究 - 摩擦モデル(Coulomb friction、viscous friction)の推定研究 - マニピュレータの model-based control に関する研究

※ AIが要旨から生成した要約です。正確性は原文をご確認ください。

著者: Mohammed Elseiagy, Tsige Tadesse Alemayoh, Ranulfo Bezerra, Shotaro Kojima, Kazunori Ohno

分類: cs.RO, cs.AI

原文アブストラクト

Bridging the sim-to-real gap remains a fundamental challenge in robotics, as accurate dynamic parameter estimation is essential for reliable model-based control, realistic simulation, and safe deployment of manipulators. Traditional analytical approaches often fall short when faced with complex robot structures and interactions. Data-driven methods offer a promising alternative, yet conventional neural networks such as recurrent models struggle to capture long-range dependencies critical for accurate estimation. In this study, we propose a Transformer-based approach for dynamic parameter estimation, supported by an automated pipeline that generates diverse robot models and enriched trajectory data using Jacobian-derived features. The dataset consists of 8,192 robots with varied inertial and frictional properties. Leveraging attention mechanisms, our model effectively captures both temporal and spatial dependencies. Experimental results highlight the influence of sequence length, sampling rate, and architecture, with the best configuration (sequence length 64, 64 Hz, four layers, 32 heads) achieving a validation R2 of 0.8633. Mass and inertia are estimated with near-perfect accuracy, Coulomb friction with moderate-to-high accuracy, while viscous friction and distal link center-of-mass remain more challenging. These results demonstrate that combining Transformers with automated dataset generation and kinematic enrichment enables scalable, accurate dynamic parameter estimation, contributing to improved sim-to-real transfer in robotic systems

関連論文

  1. 1Boston Dynamics、車輪付きAtlasの研究試作機を紹介研究・技術
  2. 2newmoとKDDIが資本業務提携 2028年に堺市で自動運転タクシー商用化目指す提携・買収
  3. 3GXOとApptronik、Apolloの物流現場試験を拡大 最大1,000台の展開を構想量産・展開
  4. 4NVIDIA、CoRLでGR00T 2とIsaac Lab 3.0を発表新製品・発表
  5. 5UC BerkeleyとNVIDIAの研究者、AIエージェントでロボット制御コードを仮想環境で改善研究・技術

PR・アフィリエイト広告

OZ GAMING(GPU搭載BTOゲーミングPC)

OZ GAMING(GPU搭載BTOゲーミングPC)の公式広告バナーOZ GAMINGで完成品PCを見る ↗
PR本紙発行元 EmplifAI