同期腱経路を備えた劣駆動ロボット指の設計と検証
Design and Validation of an Under-actuated Robotic Finger with Synchronous Tendon Routing
1本のアクチュエータで全関節を同期駆動する劣駆動腱駆動指を設計し、剛性予測モデルと試作機で荷重特性を検証、5指ハンドへの統合で把持性能を示した。
詳しい要約
1. どんなもの?
2. 先行研究と比べてどこがすごい?
3. 技術・手法の肝は?
4. どうやって有効だと検証した?
5. 議論はある?
6. 次に読むべき論文は?
※ AIが要旨から生成した要約です。正確性は原文をご確認ください。
著者: Quan Yuan, Zhenting Du, Daqian Cao, Weibang Bai
分類: cs.RO
原文アブストラクト
Tendon-driven under-actuated robotic fingers provide advantages for dexterous manipulation through reduced actuator requirements and simplified mechanical design. However, achieving both high load capacity and adaptive compliance in a compact form remains challenging. This paper presents an under-actuated tendon-driven robotic finger (UTRF) featuring a synchronous tendon routing that mechanically couples all joints with fixed angular velocity ratios, enabling the entire finger to be actuated by a single actuator. This approach significantly reduces the number of actuators required in multi-finger hands, resulting in a lighter and more compact structure without sacrificing stiffness or compliance. The kinematic and static models of the finger are derived, incorporating tendon elasticity to predict structural stiffness. A single-finger prototype was fabricated and tested under static loading, showing an average deflection prediction error of 1.0 mm (0.322% of total finger length) and a measured stiffness of 1.2x10^3 N/m under a 3 kg tip load. Integration into a five-finger robotic hand (UTRF-RoboHand) demonstrates effective object manipulation across diverse scenarios, confirming that the proposed routing achieves predictable stiffness and reliable grasping performance with a minimal actuator count.
関連論文
- 経験時代における実世界コード・アズ・ポリシー:ACE-CaP-0マニピュレーション
- 把持のアドミタンスによる入出力特性評価:設計パラメータと把持挙動の接続マニピュレーション
- ManiLadder:カテゴリ別・多難易度タスクラダーによるロボットマニピュレーションのベンチマークマニピュレーション
- 成功確率を変える事象を記憶する:Criticゲート付きイベントメモリによる長期的マニピュレーションマニピュレーション
- BiPOP: 長期的な両腕ロボット操作のための部分順序計画マニピュレーション
- RUMI: 拡張現実と触覚フィードバックを備えたRobotiq対応の汎用マニピュレーションインターフェースマニピュレーション
